The international PV standards map
Learn which IEC standard covers modules, inverters, array design, testing and thermography, and how to check which edition applies before you pay for anything.
- Core
- Intermediate
- about 8 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Which question does this standard answer, who has to follow it where I work, and which edition is in force? Ask those three, in that order, of any document in front of you. Then find the route your scheme or country uses to get there, which is often a certification list or a national number rather than the IEC text itself.
From a datasheet line to the check you actually do
A module datasheet quotes IEC 61215 and IEC 61730 (see PV modules and datasheet reading). What do you actually check on a UK job under MCS?
- IEC 61215 is design qualification and IEC 61730 is safety qualification. That is all the numbers say.
- MIS 3002 clause 5.5.1 (Issue 6.0) does not ask you to read either standard. It asks that modules are certified to MCS 005 and listed on the MCS site. As read on 20 November 2026, Issue 6.0 does not name IEC 61215, IEC 61730 or IEC 62109 anywhere in its text. So your check is the listing for that exact model.
- For testing and records, the reference list in section 10.3 does name BS EN 62446-1:2016+A1:2018, and Appendix E adapts its forms. That is the standard behind your commissioning record.
- Ask which MIS 3002 issue your employer’s certification body works to, to confirm the edition.
The same datasheet in India leads somewhere else. The UPNEDA primer pairs IEC 61215 with IS 14286, and many schemes also want the module on the ALMM list. One line, two routes, and neither is “read the IEC text”. Which national rulebook you work to is chosen in your regional code track.
What the standards cost, and what reading them allows
The IEC texts are sold; the webstore listed IEC 62548-1 at CHF 405 for one user on 20 November 2026. In the UK, MIS 3002 Issue 6.0, clause 10.2, makes it a scheme requirement for MCS contractors to own BS 7671 and the IET code of practice, among other documents, so ask your employer what they hold before buying anything. The free parts are the scope page and the scheme’s reference list, which are enough to fill in the practice map. Of the 17 postings we sampled (UK, US, Germany, India and Australia; how we research roadmaps), 4 asked for BS 7671 (18th Edition), all in the UK, and 3 asked for NFPA 70E, all in the US, so check which national document your target employers name before you spend money on any standard.
Reading a standard is safe. Doing electrical work from one is not, without the authorisation your country requires. A test standard describes what to test; a competent, authorised person with the right instruments still does the testing, as in inspection and tests before switch-on.
What you will learn
- Which standard answers which question: module qualification (IEC 61215 series and IEC 61730), inverter safety (IEC 62109), array design (IEC 62548-1), testing and documentation (IEC 62446-1)
- How on-site I-V curve measurement (IEC 61829) and outdoor thermography (IEC TS 62446-3) fit into commissioning and maintenance
- How a national body republishes an IEC standard under its own number, such as BS EN IEC 62446-1 in the UK or an IS number in India
- How to check a standard's scope, edition year and amendments before you buy anything
- How to find out which edition your employer, scheme or customer actually calls up
The parts of this topic
Modules and inverters, and national numbersabout 2 hours
IEC 61215 and 61730 qualify modules, IEC 62109 covers inverter safety, and countries republish them under their own numbers, such as India's IS 14286 and IS 16221.
A module datasheet quotes IEC 61215 (design qualification) and IEC 61730 (safety); an inverter datasheet quotes IEC 62109. The UPNEDA vendor primer in India pairs IEC 61215 with IS 14286 and IEC 62109 with IS 16221, so one test can sit under two numbers. A module sold in India should show its test standards and its ALMM approval status. Copying a standard number from a datasheet is not a check: confirm the edition year and that the certificate belongs to that exact model.
- Rooftop solar primer for vendors, 3 kW (UPNEDA) UPNEDA, Uttar Pradesh · Guide India. Lists the IEC and IS standards expected for each component.
IEC 62548-1: array design requirementsabout 2 hours
IEC 62548-1 sets design requirements for the DC side of a PV array: wiring, protective devices, switching and earthing. It leaves out storage, loads and the AC network.
IEC 62548-1:2023 has a consolidated version with Amendment 1:2025. Its scope is DC array wiring, protection devices, switching and earthing; energy storage devices, loads and AC or DC distribution networks are excluded, so the AC side and storage need other rules. A designer checks string protection and isolator choices against it. The IEC webstore listed a one-user copy at CHF 405 on 20 November 2026, so ask your employer for access.
IEC 62446-1: testing and documentationabout 2 hours
IEC 62446-1 defines the documents, inspection and tests for a grid-connected PV system before handover. UK MCS commissioning forms are adapted from it.
IEC 62446-1 is the grid-connected part: which documents a system needs, which commissioning tests are run and what is inspected. A form records results; it is not a test method, so the standard and your supervisor define how to test. MIS 3002 Issue 6.0 lists BS EN 62446-1:2016+A1:2018 and reproduces adapted forms in Appendix E with BSI permission. One BSI catalogue entry for the standard carries a draft-for-comment number (20/30398805 DC, 2020), so check which edition your scheme calls up.
IEC 61829 and IEC TS 62446-3 in the fieldabout 1 hour
IEC 61829 covers measuring a PV array's I-V curve on site; IEC TS 62446-3 covers outdoor infrared thermography of modules and plants in operation.
IEC 61829 (edition 2.0, 2015) describes measuring the I-V characteristics of a flat-plate array on site, recording the weather at the time and converting the result to standard test conditions. Example: a technician compares a string's I-V curve with its commissioning baseline. A curve taken in weak or changing light cannot be compared with a datasheet value unless it is corrected. IEC TS 62446-3 (2017) covers outdoor infrared inspection of modules and plants in operation.
IEC 60364 and national wiring rulesabout 1 hour
National wiring rules such as the UK's BS 7671 are based on the IEC 60364 family and amended on their own timetable, so the national edition is the one you work to.
IEC 60364 is the international series on electrical installations in buildings, and national rules are based on it. BS 7671:2018+A4:2026 is the current UK edition: the IET says the transition period for Amendment 2 ended on 15 October 2026, and SELECT's guide to Amendment 4 lists a new Chapter 57 on stationary secondary batteries (as read on 20 November 2026). A4 added a chapter that is relevant to home battery work. Do not quote a clause from an older amendment because an old PDF or course handout still circulates.
- BS 7671:2018+A4:2026: what's new (SELECT guide) SELECT (Scottish electrical trade body) · Guide Trade-body overview of the changes. It says Amendment 4 was published on 15 April 2026 and the A2+A3 text is withdrawn from 15 October 2026.
Practice task
Make a one-page map with one row per standard: what it covers, the edition year as this topic gives it, who has to follow it where you plan to work, and whether it is paid. Fill it in from this topic and the free MIS 3002 reference list linked here without buying anything, and mark every cell you could not confirm.
Skills you build
Telling what a standard coversIEC 62548-1 array designIEC 62446-1 testing and documentationNational adoptions of IEC standards
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- MIS 3002 Issue 6.0, the UK solar PV installation standard (see section 10 and Appendix E) MCS · Standard Free for personal use. Shows how one scheme lists the BS EN and IEC documents it relies on.
- NABCEP PV Installation Professional Resource Guide NABCEP · Guide 2016 edition written around the 2014 NEC. Use it for structure, not for current code text.
- 2023 National Electrical Code and photovoltaic power systems IAEI Magazine · Guide Shows the US route, where the NEC and UL listings do the job that IEC and national standards do elsewhere.
Latest Renewable Energy jobs
No title matches the role right now, so these are the latest jobs in the same category.
No live jobs to show right now. Check back soon, or browse every green job.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.