Lockout/tagout and permits to work
How lockout/tagout and permits to work keep equipment from restarting while someone works on it. You will know who is authorised, what a lock and tag record, and why a battery needs its own plan.
- Core
- Beginner
- about 6 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Who isolated it, and who may restore it? A lock answers that for one named person, and a permit answers it for a whole site. Both also answer which energy sources exist and who is working. Your employer’s procedure sets the real rules, and you will be trained on it; learn the logic here so that the procedure makes sense when you meet it, starting from electrical safety for DC and AC solar work.
A shared hasp on one inverter block, from permit to handback
This is an invented walk-through to show the logic, not a procedure for a real site. A large solar plant has several inverter blocks, and one needs work while the rest keep running.
A permit to work names the job, the block, the people, the hazards and the isolations, and sets a time window. The isolating point carries a shared hasp, and each of the three authorised technicians adds a personal lock. The operations desk and a crew working nearby are affected people, so they are told. The plant also has a battery container, which appears on the permit as its own source with its own isolation, because isolating the inverter does not de-energise it. Batteries have their own topic, battery storage fundamentals.
Then the day gets complicated. One technician breaks for lunch: her lock stays on. Another finishes early and removes his own lock and only his. A third is sent home unwell with her lock still on the hasp. Nobody simply cuts it off. The rule is that the person who applied a lock removes it. OSHA allows narrow exceptions, but only after the employer has confirmed the owner is not on site and only if the owner is told before returning to work, so the supervisor follows the employer’s procedure. Power returns only at handback: every lock off, the permit closed and everyone confirmed clear.
How the US and British systems word the same idea
In the US, OSHA’s rules (1910.147 and 1910.333) speak of locks, tags, authorised and affected employees. In Britain, HSE’s guidance (HSG85 on safe working practices and HSG250 on permit-to-work systems) speaks of isolation and permits. The words differ, but the logic is the same: identify every source, isolate, verify, record, hand back. HSG250 was written for process industries, so treat it as a model for large shared sites rather than as the rule for a house roof. Which wording governs your work depends on your country and your employer’s procedure. Routine maintenance visits are in O&M programmes and inspection routines.
What you will learn
- What hazardous energy is and why solar equipment has several sources of it
- The lock, tag, verify and restore sequence in outline
- Who is an authorised person and who is an affected person
- How permits to work and group lockout control shared work
- Why batteries and capacitors need stored-energy checks
- How US lockout/tagout rules and UK and EU permit systems differ
The parts of this topic
Lock, tag, verify and restoreabout 1 hour
Isolate every source, lock and tag it, verify the state, work, then restore only when everyone is clear.
OSHA's solar page lists the core steps: identify and isolate all energy sources, lock or tag the isolating device in the safe position, release stored energy, and verify isolation before work. Locks and tags identify the worker who applied them and stay until the work is finished. 'Switched off' is not the end of the job: the verify step is what makes the isolation real. Example: an inverter isolator locked off with a personal lock and a tag showing the owner.
- Solar energy: lockout/tagout OSHA (United States) · Guide
Authorised people, affected people and group lockoutabout 1 hour
Qualified people verify and test the isolation; affected people must be told; groups use a shared point with personal locks.
OSHA's general-industry rule 1910.333 says circuits must be locked out or tagged, that a qualified person verifies the equipment cannot be restarted and tests that the circuit parts are de-energised, and that each lock and tag is removed by the employee who applied it, with narrow exceptions. The lockout standard 1910.147 (linked above) adds that affected employees, such as colleagues who use the equipment or work nearby, must be notified, and that in group lockout each authorised person adds a personal lock. With three technicians, each adds a personal lock to the same hasp. Your lock stays on until your own part is done; stepping away without it 'for a minute' defeats the system.
- 29 CFR 1910.333: selection and use of electrical work practices OSHA (United States) · Law or regulation
Permits to workabout 1 hour
A written permit says what work, where, who, for how long and what isolations are in place; it stops at handback.
A permit to work is a formal written record that a defined job may go ahead, with the isolations, hazards, precautions and the people named, and a formal handback when it ends. A permit for work on one inverter block while the rest of the plant runs shows the idea. Treat the permit as the control it is, not as paperwork. HSE's guidance HSG250 was written for process industries, but the logic carries over to a large solar site where several contractors share a plant.
- Guidance on permit-to-work systems (HSG250) HSE (Great Britain) · Guide Written for process industries; the permit logic carries over to solar sites. Free download.
Stored energy in batteries and capacitorsabout 1 hour
Batteries and capacitors keep energy after isolation, so a battery system stays dangerous when everything else is off.
The Victorian guideline warns that battery cells can deliver a severe electric shock when connected as banks, and that there are 230 V AC parts as well, so energy storage is a serious risk if wrongly installed. Isolating the inverter does not de-energise a battery, and following the PV isolation routine while forgetting the battery is the classic gap. A home battery has its own isolator and a shutdown procedure that the manufacturer's manual describes step by step.
- Working safely when installing photovoltaic (PV) systems (Victoria, Australia, 2018) Energy Safe Victoria and WorkSafe Victoria · Guide A 2018 state guideline: rules differ by state, so use it for the hazards, not for your local law.
Circuits that cannot be isolatedabout 1 hour
When something must stay live nearby, the rule is to guard it or keep clear; only qualified people go near it.
Some circuits cannot be isolated, such as a supply cable you must work beside. OSHA 1926.416 says no employer may allow an employee to work so close to an electric power circuit that they could contact it, unless they are protected by de-energising and grounding it or by guarding it effectively with insulation or other means. Deciding it is fine because you will be careful is not a control: the guarding must be in place before work. Temporary insulating covers fitted by a qualified person over a live service are one form of guarding.
- 29 CFR 1926.416: electrical safety requirements for construction OSHA (United States) · Law or regulation
Practice task
Write a one-page lockout/tagout and permit plan for a fictional site with a grid supply, a DC array and a battery. Show each energy source, the isolation point, who is authorised to lock it, what the tag says, how stored energy is checked, who may remove each lock and what has to be confirmed before anyone restores power. Ask a qualified electrician or tutor to review it.
Skills you build
Lockout/tagout conceptsPermit to work awarenessStored-energy awarenessAuthorised and affected people
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Control of hazardous energy (lockout/tagout) OSHA (United States) · Guide
- 29 CFR 1910.147: the control of hazardous energy (lockout/tagout) OSHA (United States) · Law or regulation
- Electrical safety (HSE electricity pages) HSE (Great Britain) · Guide
Latest Renewable Energy jobs
No title matches the role right now, so these are the latest jobs in the same category.
No live jobs to show right now. Check back soon, or browse every green job.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.