Entry routes and who may do which work
Which route into solar work fits your country, and who may legally connect, test and sign off a system. You will list the work you can do now and the licence you need for the rest.
- Core
- Beginner
- about 6 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Licensing rules, not courses, decide your first move. Germany reserves work behind the house-connection fuse to firms in the grid operator’s installer directory, Australia reserves installation to licensed electricians, and MIS 3002 allows UK self-certification only through a Competent Persons Scheme. So the real choice is whether you start from the electrical trade or the roof, and working outside your local licensing rules can be illegal as well as dangerous. Settle that for your country, then take the cheapest first step along that route; what a solar PV technician actually does helps you choose the role first.
Sorting a German roof job by who may do each task
A roof team in Germany has one job to divide. The two German sources below say who may do what:
- Mounting the rails and modules: roof work.
- Wiring the strings on the DC side: a worker who has the eight-unit electrically instructed person (EuP) module, under the direction and supervision of an electrician.
- Connecting and commissioning: the electrician.
- Work on the installation behind the house-connection fuse: firms in the network operator’s installer directory.
So a German roofer can take the roof work now, aim for the EuP module next, and leave the connection to the registered electrician.
What a licence, a certification and a card each let you do
A licence is permission to do legally restricted work. A certification or card shows training or a passed exam, and it may not let you do anything new. MCS certifies companies, not individuals. NABCEP credentials show an exam and, for some, logged experience, while the licence to work on electrical systems in the US is set by each state. OSHA 10 and 30-hour cards are safety training cards, not certifications. An advert that says ‘NABCEP preferred’ asks for a credential; it does not say you may connect a system. Certifications and licences by region goes deeper on the credentials.
The same split in the job postings
Employers in our sample of 17 job postings (UK, US, Germany, India and Australia; how we research roadmaps) drew the same line: every UK, Indian and Australian posting asked for an electrical qualification or licence, as did 3 of the 4 German ones, but only 1 of the 5 US ones. NABCEP was named in all 5 US postings, always as preferred or something to obtain.
Tracing the rule for your own country
Your answers will differ from Germany’s, so repeat the sort for your country: write each task, who may do it, which official page says so and the date you read it. If you cannot find the rule on an official page, ask the licensing body or an employer, not a course seller. A rule you cannot trace to a source is a guess. Your regional code track goes deeper once you have picked a route.
The facts on this page were read on 20 November 2026. Fees, funding and entry rules change, so confirm each one with the regulator, awarding body or training partner you plan to use.
What you will learn
- Which tasks in a solar job need a qualified or licensed electrician in your country
- The electrician-first routes in the UK, Germany, India and Australia
- The labourer-first route in the US and where state licensing applies
- Roofer and trade-assistant routes, and the limits of work they allow
- What MCS, NABCEP, ECS and OSHA cards are, and that none of them is a licence
- How to find free or low-cost first steps near you
The parts of this topic
UK: electrician first, then a solar awardabout 1 hour
Complete an electrician route, then add a solar PV award; labouring can lead in, but cannot replace it for AC work.
The National Careers Service lists college, a T Level, a Level 2 or 3 apprenticeship, or starting as a labourer and training up. Solar awards from City & Guilds (2922-34; MIS 3002 Appendix A also names older 2399-11 and 2399-12), BPEC and LCL Awards suit people who are already electricians. Skills England has a solar PV apprenticeship unit, AU0007, for employed electricians aged 19 or over. A Level 3 electrician, for instance, adds an 18th Edition update and a solar award. Booking an award with no electrical background can end in a refusal, so check the entry rules first.
- Apprenticeship unit AU0007: Solar PV installation and maintenance Skills England · Certification For qualified electricians in England; the page is free to read.
- ECS card: Installation Electrician ECS (JIB) · Certification Entry requirements for the Gold Card; check ECS for the current card fees.
US: labourer first, then NABCEP and a state licenceabout 1 hour
Entry jobs often ask only for a high school diploma; credentials such as NABCEP and a state licence come later and vary by state.
In the five US postings sampled for this roadmap, entry roles asked for a high school diploma or GED, lifting and ladders, and treated NABCEP as preferred or something to obtain, never as a hard requirement. NABCEP's associate credential has two routes: an approved course, or six months of full-time-equivalent PV work. Electrical and contractor licensing is set by each state; California's C-46 solar contractor exam is one example. A certificate from one state does not carry over automatically, and an OSHA card is safety training, not a licence.
- NABCEP: apply and enrol NABCEP · Certification Eligibility routes; check the current wording before you plan.
- California C-46 Solar contractor exam study guide California Contractors State License Board · Guide Shows how one US state tests solar knowledge; California only.
EU: electrician or electrically instructed person (Germany)about 1 hour
In Germany DC-side work may be done by an electrically instructed person under an electrician; connection needs the registered installer.
The German employer and trade associations' agreement on PV installations describes an eight-teaching-unit course after which a worker counts as an electrically instructed person (EuP) for DC-side work, always under the direction and supervision of a qualified electrician (Elektrofachkraft). Paragraph 13 of the low-voltage connection ordinance (NAV) says work on the installation behind the house-connection fuse is for firms in the network operator's installer directory. On a German roof job, the team mounts and wires strings while the electrician connects and commissions. This is a German rule, not a Europe-wide one: other countries differ, and the sources are in German.
- Verbaendevereinbarung Photovoltaikanlagen, Anlagen 1 bis 3 (in German) BG BAU (Germany) · Guide In German. Describes the training module for electrically instructed persons (EuP) doing DC-side work.
- Paragraph 13 NAV: Niederspannungsanschlussverordnung (in German) Federal Ministry of Justice (Germany) · Law or regulation In German. The installer-directory rule for work on the installation behind the house-connection fuse.
- The European Solar PV Credentials EIT InnoEnergy · Certification A pilot network of training providers in six European countries; cost is not stated on the page.
India: ITI plus the NSQF level 4 qualificationabout 1 hour
The national Solar PV Installer (Electrical) qualification is a 390-hour programme with theory, practical and on-the-job parts.
The national qualification file for Solar PV Installer - Electrical sits at NSQF level 4 and lists 390 hours: 165 theory, 105 practical and 120 on the job. Entry rules in the file include the 12th with science, or the 10th plus two years of trade training (ITI-type), or the 10th plus three years of renewable-energy experience, and age 18 or over. Example: an ITI electrician adds the module to move into rooftop installation. Aggregator sites describe eligibility differently, so read the register file and ask the training partner.
- Solar PV Installer - Electrical (NSQF level 4), national qualification file National Qualifications Register (India) · Certification Lists the units, entry rules and the 390-hour structure.
- National Skill Development Corporation (India) NSDC (India) · Guide
Australia: licensed electrician first, then accreditationabout 1 hour
Installers must hold an electrical licence first; Solar Accreditation Australia took over installer accreditation in February 2024.
The Clean Energy Regulator announced that Solar Accreditation Australia (SAA) became the accreditation body for solar installers and designers from 29 February 2024, and the Clean Energy Council's careers page says installers must be licensed electricians first. Electrical licensing is by state or territory. A licensed electrician then applies to SAA for accreditation to install under the small-scale scheme. Advice written before 2024 names the previous body, so check the current pages.
- Media release: new accreditation body for solar installers and designers Clean Energy Regulator (Australia) · Law or regulation
- Small-scale solar careers Clean Energy Council (Australia) · Guide
Roofer and trade-assistant routesabout 1 hour
Roofers and labourers can enter as installer's mates for mounting work, but not for connection work that needs an electrician.
A roofer or general labourer can start in mounting, module handling and cable management under supervision, and in the UK the National Careers Service lists starting as a labourer and training on the job. MIS 3002 notes that roofers may not be used to electric shock risks and electricians may not be used to handling large objects at height, so each group has a gap to close. Example: a roofer takes an electrical awareness course while an electrician takes a height and handling course. Drifting into connection work without the licence is the line not to cross.
- Job profile: Roofer National Careers Service (UK) · Guide
- MIS 3002 Issue 6.0: the Solar PV Standard (Installation) MCS · Standard Free to read. Dated 18 March 2026; mandatory for contractors certified under it from 18 June 2026. The library also lists a redeveloped MIS 3002:2025 Issue 2.0, so check which one your employer is certified to.
Practice task
Write a one-page route plan for your country: list the work you may do now, the work that needs a licence, the route to that licence, and one free or low-cost first step with a date. Check each rule against the official source linked here and write down the date you checked it.
Skills you build
Reading licensing rulesRoute planningApprenticeship searchCredential vocabulary
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Job profile: Solar panel installer National Careers Service (UK) · Guide UK entry routes: college, T Level, apprenticeship, or starting as a labourer.
- Occupational Outlook Handbook: Solar photovoltaic installers US Bureau of Labor Statistics · Guide US figures; the page's pay and growth numbers are updated each year.
- Become an apprentice: how apprenticeships work GOV.UK · Guide
- Find an apprenticeship UK Government · Jobs
- Introduction to Understanding Solar PV Installations (online) West Nottinghamshire College · Course Free for eligible learners in England aged 19 or over; about 20 hours. Check the eligibility rules.
- Introduction to Solar Photovoltaic (PV) Installation Southface Institute · Course Free, five modules, US-oriented.
Jobs related to Solar PV technician
No title matches the role itself right now, so these are live jobs in the same field.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.