Certifications and licences by region
Credentials split by country. Pick the path for your region, read each issuer's prerequisites and fees on its own page, and choose the cheapest first step an employer will notice.
- Core
- Intermediate
- about 20 hours
- Pick one
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Adverts tell you which credentials your region names; the issuer’s own page tells you what each requires and costs. Read three live adverts, open the issuer’s page for every credential they name, and write down the prerequisite, the published cost and the date you looked. Then pick the cheapest first step an employer will notice. This topic is pick-one: take the region box that matches you.
An electrician in England and a trainee in the US
Their first steps differ. Both people are made up, and the fees are those the issuers’ pages showed on 20 November 2026; check the issuer again before you pay.
- Electrician in England: has finished a Level 3 apprenticeship and holds a current BS 7671 qualification. Local adverts name a solar award. One provider’s page for City & Guilds 2922-34 (solar PV) asks for an ECS Gold Card or a Level 3 electrical qualification plus the 18th Edition. This person already meets that, so the award is the next step, not a course to take first.
- Trainee in the US: has no trade qualification. OSHA’s page says the 10-hour and 30-hour classes are not certifications, so they go on the CV as safety classes, not credentials. NABCEP’s PV Associate is open through an approved course or six months of full-time-equivalent PV work, and costs a 25 dollar application plus a 125 dollar exam (up to 180 dollars through a training provider, says NABCEP’s fee page): 25 + 125 = 150 dollars at the lower figure. The first step is the course or the logged work months. A board certification such as PV Installation Professional needs OSHA 10, 58 hours of training and 6 project credits, so it comes later.
What the sampled adverts asked for
Of the 17 postings we sampled (UK, US, Germany, India and Australia; how we research roadmaps), 12 asked for an electrical trade qualification or licence: all 4 in the UK, all 3 in India, the 1 in Australia, 3 of 4 in Germany and 1 of 5 in the US. All 5 US postings mentioned NABCEP, always as preferred or willing to obtain, and 4 of 5 mentioned OSHA 10 or 30. Check which of these your region’s adverts lean on before choosing a first step.
How a credential plan goes wrong
- A solar award bought before the electrical qualification it assumes. Read the course’s entry line first; if you do not meet it, the electrical qualification is your first step.
- A safety card treated as a licence. A certificate shows training; a licence is legal permission, so ask your regulator or licensing board what you may do. Entry routes and who may do which work explains the legal side.
- A fee copied from a forum or an old blog. Copy it from the issuer page and write the date next to it. NICEIC’s fee sheet says “from 1 April 2026”, while NABCEP’s fee page shows no date, so note the day you read it. Renewals are covered in staying current with codes and training.
- A licence assumed to cross a border. State, country and scheme each have their own rules. Check the issuer recognises it where you will work.
What you will learn
- Which credentials employers and incentive schemes in your region actually ask for, and which are optional extras.
- What each credential requires first: an electrical qualification, safety cards, training hours or work experience.
- How to read an issuer's page for fees, prerequisites and renewal, and how to date what you found.
- Why a licence is a legal permission and a certificate is proof of training, and why the two are not the same.
- How to choose the first credential for the cheapest, quickest step that an employer will notice.
Pick one of these
These are alternatives. Learn the one your employer or course uses; one is enough to complete the topic.
UK: electrician awards and the ECS cardabout 3 hours
For a qualified electrician: BS 7671, then solar and storage awards, inspection and testing, and the ECS Gold Card.
A common UK path for a qualified electrician combines a current BS 7671 qualification, the City & Guilds Level 3 awards 2922-34 (solar PV) and 2923-34 (storage), and 2391-52 for inspection and testing. One provider's 2922-34 course asks for an ECS Gold Card or a Level 3 electrical qualification plus the 18th Edition. The ECS Gold Card needs a JIB-recognised Level 3 apprenticeship or NVQ, the ECS health and safety assessment and a BS 7671:2018 qualification. IET says A4:2026 is current and A2's transition ended 15 October 2026. In England, unit AU0007 (35 hours minimum, funding cap 950 pounds) is for employed electricians aged 19 or over.
- Solar PV apprenticeship unit AU0007 Skills England · Guide England; employed learners; a funded unit, not a free-for-all course
UK: MCS company certificationabout 2 hours
For a business: a certification body assesses the company and a Technical Supervisor so customers can claim UK incentives.
A company that installs under MCS applies to a certification body such as NICEIC. NICEIC says the Technical Supervisor needs an in-date qualification, the company needs at least 2 million pounds public liability and 250,000 pounds professional indemnity insurance, and an office and site assessment follows. Its fee sheet from 1 April 2026 shows 95 pounds application plus 705 pounds for one technology plus a 55 pound MCS licence fee (all plus VAT), then 640 plus 55 pounds from year two. Other certification bodies price differently, so check the current sheet.
- NICEIC MCS fee sheet (from 1 April 2026) NICEIC · Certification Fee sheet is free to read; the scheme is paid
US: OSHA cards and NABCEPabout 3 hours
OSHA 10 and 30 are voluntary safety classes; NABCEP offers associate credentials and board certifications for solar and storage.
OSHA says its Outreach 10-hour and 30-hour classes are not certifications and are a voluntary program, though some states, cities and employers require them. NABCEP's PV Associate and O&M Associate Technician are open through an approved course or six months of full-time-equivalent PV work. Its fee page lists a 25 dollar application, a 125 dollar exam (125 to 180 via a training provider) and 150 dollar renewal, with 75 dollars extra outside the US and Canada. Board certifications such as PV Installation Professional (125 plus 375 dollars) need OSHA 10, 58 hours of training and 6 project credits. Check NABCEP for current fees and rules.
- OSHA Outreach Training Program OSHA (United States) · Guide The page states the 10-hour and 30-hour classes are not certifications
US: state contractor licence (California C-46)about 3 hours
Licensing is by state; in California the C-46 solar classification needs an application, an exam and fees.
Licensing differs by state. In California, the Contractors State License Board's C-46 classification covers installing, modifying, maintaining and repairing solar systems. CSLB's FAQ gives a 450 dollar application fee and an initial licence fee of 200 dollars for a sole owner or 350 dollars otherwise. The exam is closed-book multiple choice: planning and estimating about 14%, installation 17%, PV installation and commissioning 28%, thermal 7%, service 15%, safety 19%. Check CSLB for the experience and bond rules, and your own state's board for its rules.
- CSLB: C-46 Solar Contractor classification California Contractors State License Board · Law or regulation
- CSLB frequently asked questions California Contractors State License Board · Law or regulation Source of the application and initial licence fees
- C-46 Solar examination study guide California Contractors State License Board · Guide For exams on or after 1 July 2023
Europe: Germany's EuP route and EU credentialsabout 2 hours
In Germany DC-side work can be done by an instructed person under an electrician; the EU also has pilot PV credentials.
The German employers' agreement describes an 8-unit module (3 theory, 5 practical) for an electrically instructed person (EuP) who works under the direction and supervision of an Elektrofachkraft. It covers DC cabling and connectors fitted dead, and lists prohibited work such as live work and connecting to the electrical installation. Section 13 of the NAV allows most work behind the house connection fuse only for firms in a network operator's installer directory. InnoEnergy's pilot European Solar PV Credentials have Installer and Installation Technician levels in six countries; as read on 20 November 2026, the page states no cost.
- Weiterbildung Montage von PV-Generatorfeldern (BG BAU, in German) BG BAU · Guide German-language PDF; annex 1 of the employers' agreement
- NAV section 13 (in German) German federal law portal · Law or regulation German-language legal text; check the current wording
India: NSQF level 4 and electrical licensingabout 3 hours
A national qualification for solar PV installers sets hours and entry rules; separate state electrical licensing may also apply.
The national qualification file Solar PV Installer - Electrical sits at NSQF level 4 with 390 hours: 165 theory, 105 practical and 120 on the job. Entry routes in the file include 12th (Science), or 10th pass with 3 years of renewable-sector experience, or 10th pass with two years of trade training (NTC, NAC or CITS), at age 18; the pass mark is 70% aggregate. The Skill Council for Green Jobs is the sector body. Whether you also need a state electrician or wireman licence depends on your state, and the sources read on 20 November 2026 do not settle it, so ask your state electricity board.
- Solar PV Installer - Electrical: qualification file National Qualifications Register, India · Guide Qualification code QG-04-ES-02629-2024-V2-SCGJ; revised May 2024
- Skill Council for Green Jobs Skill Council for Green Jobs · Guide Sector skill council site; some page text is placeholder
Australia: electrical licence and SAA accreditationabout 2 hours
Installers must be licensed electricians first, then accredited to let customers claim incentives.
The Clean Energy Council's page says installation is always done by a licensed electrician. For customers to claim federal and some state incentives, the supervising electrician must be an accredited installer, which means being a qualified electrician and completing prerequisite units through a TAFE or private provider. The Clean Energy Regulator says Solar Accreditation Australia took over installer and designer accreditation on 29 February 2024. As read on 20 November 2026, no published accreditation fee was found, so check SAA directly. Licensing is by state.
- New accreditation body for solar installers and designers Clean Energy Regulator · Law or regulation Media release, 29 February 2024
- Small-scale solar careers Clean Energy Council · Guide
Practice task
Make a one-page credential plan for your region with a table you can show an employer: credential, issuer, prerequisite as the issuer's page states it, published cost with the date you checked, what three live job adverts in your region ask for (GreenHired's job list is a free place to read them) and your chosen first step. Add one question to ask the issuer. Desk work only.
Skills you build
Credential planningReading issuer requirementsLicensing awarenessCost and prerequisite checking
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Solar panel installer (job profile) National Careers Service (England) · Guide England; routes, entry requirements and pay range
- Solar Photovoltaic Installers (O*NET OnLine) US Department of Labor · Guide US; tasks, skills and typical titles
- Introduction to solar PV installation Southface · Course US-focused free course; check the page for current access
- Introduction to understanding solar PV installations (online) West Nottinghamshire College · Course England only; the page lists adult-learner and residency conditions
Live Solar PV technician jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.