What a solar PV technician actually does
'Solar PV technician' covers several jobs: installer, electrician, commissioning, O&M, surveyor and designer. You will learn which one to aim at first and how to read an advert for it.
- Core
- Beginner
- about 4 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Which job is a ‘solar installer’ advert actually offering? The title alone may not say. Decide which task you want to be doing in two years (fitting rails, making the AC connection, testing strings, chasing faults), then read adverts for that role until you can tell what is required, what is preferred and what an employer will train you for.
A rooftop system, from survey to the first fault
Follow a single house system through a firm. A surveyor measures the roof and notes the rafters, the loft and the consumer unit. A designer turns that into a layout and a string plan. A crew mounts the hooks, rails and modules and runs the DC cable. A qualified electrician makes the AC connection and often signs the certificates. A commissioning technician tests the system, sets the grid profile and records the results. Months later an O&M technician visits because monitoring shows one string has dropped. Specialist paths shows where each of these roles can lead.
The same title, ‘solar installer’, can cover only the mounting in one advert and the whole job up to the AC connection in another. Read the tasks, not the title.
Reading a ‘Solar Installer’ advert line by line
Here is an invented UK advert, not a real posting. Title: ‘Solar Installer’. It asks for a Level 3 electrical qualification, the 18th Edition, a driving licence and comfort working at height. It adds ‘MCS knowledge an advantage’ and ‘battery training provided’.
Does the Level 3 line mean the job includes the AC connection? It suggests so, which would make this an electrician’s post whatever the title says; ask the employer which tasks would be yours. What does ‘an advantage’ mean? Preferred, so you can apply without it. And ‘provided’? The employer trains you, so you need not have it yet. The driving licence tells you that you will travel between sites with tools, and physical demands and your skills log covers the height line.
Real postings show both patterns. In the sample of 17 job postings (UK, US, Germany, India and Australia; how we research roadmaps), 12 asked for an electrical trade qualification or licence, and about 5 were open to trainees with no solar experience. Who may do which work depends on where you live, and entry routes and who may do which work goes through it country by country.
If you hold none of the electrical qualifications, the sensible move is to aim at a mounting crew or trainee role and plan the qualification, not to apply and hope.
What you will learn
- The main job families in solar: installation, electrical, commissioning, O&M, survey and design
- How job titles differ by country and by employer type
- Which tasks in a solar job need a qualified or licensed electrician where you live
- What a working day, the kit and the pay range look like for entry-level roles
- How to read an advert: required, preferred and 'willing to obtain' qualifications
The parts of this topic
Residential and small commercial installabout 1 hour
The most common entry job: fitting a rooftop system on a home or small building, in a small crew, from survey to handover.
A typical domestic job is a 3 to 10 kW roof system: scaffold or ladder access, rails and hooks, modules, DC cabling, an inverter, and a tie-in to the consumer unit by a qualified electrician. In the UK, systems up to 50 kWp DC fall inside MCS standard MIS 3002, which is free to read. One way a crew splits the work: two people mount the array while an electrician makes the AC connection. Newcomers often think the roof work is the whole job, but testing, paperwork and the customer handover decide whether the system can be signed off.
- MIS 3002 Issue 6.0: the Solar PV Standard (Installation) MCS · Standard Free to read. Dated 18 March 2026; mandatory for contractors certified under it from 18 June 2026. The library also lists a redeveloped MIS 3002:2025 Issue 2.0, so check which one your employer is certified to.
Commercial rooftop (C&I)about 1 hour
Larger systems on shops, warehouses and offices: more modules, higher DC voltages, three-phase connections and stricter site rules.
Commercial jobs use the same parts as homes at a larger scale: several inverters or a big one, three-phase connection, ballasted or fixed mounting on flat roofs and long cable runs. Crews work to a site plan under a principal contractor, with inductions and permits. Example: a 100 kWp warehouse roof that needs edge protection, walkways and a utility connection approval. A bigger system also means a written method statement and often an engineer's sign-off of the roof.
- Solar photovoltaic system design basics US Department of Energy · Guide
Utility-scale ground-mount plantsOptionalabout 1 hour
Solar farms: piling, trackers, thousands of strings and inverter stations, built by large crews to quality-control plans.
A ground-mount plant is built in sequence: survey, piles or ground screws, racking or trackers, modules, string cabling, combiner boxes, inverter stations and the grid connection. It is not simpler than rooftop work: voltages are higher, cranes and telehandlers are in use, and the electrical work is split between trades with separate authorisations. Many entry roles are module and cable installation under a supervisor, such as a crew installing hundreds of modules a day against a torque and quality checklist.
- Photovoltaics Report Fraunhofer ISE · Dataset Market and technology overview that shows how fast PV is growing; read it for context on scale, not for job duties.
Commissioning technicianabout 1 hour
Tests a finished system, sets the inverter up for the grid and proves it works before handover.
Commissioning is the step between built and generating. The technician inspects the installation, runs the electrical tests, sets the inverter's grid profile, confirms monitoring works and records the results. NABCEP's job task analysis for its commissioning and maintenance credential is a useful task list even outside the US. For instance, the technician measures string voltages, checks insulation resistance, then watches first output against the sunlight. The recorded results are the evidence that the system was safe when you left it.
- PV Commissioning & Maintenance Specialist: job task analysis NABCEP · Certification A list of the tasks the credential covers.
Operations and maintenance (O&M) technicianabout 1 hour
Keeps existing systems producing: inspections, cleaning, fault finding, inverter swaps and reports, often with test instruments.
O&M technicians work on systems that already run. A visit may be a scheduled inspection, a cleaning round, or a call-out because monitoring shows a string has dropped. The kit is heavier on instruments: clamp meter, insulation tester, I-V tracer, thermal camera. Of the postings sampled for this roadmap, the two that named test equipment were US commissioning and O&M jobs. One call-out might end with a low-producing string traced to a failed connector. Fault finding builds on knowing how a system is put together, so installation experience is a sensible first step.
- A day in the life of a renewables technician Solar Power World · Guide Trade-press feature built around one test-equipment maker; read it for the daily routine and kit list.
- Operations & Maintenance Associate Technician (OMAT) NABCEP · Certification
Survey, design and estimatingabout 1 hour
The site-visit and office roles that decide what is built: roof survey, system design, yield estimate and quote.
Surveyors visit the site and record roof geometry, shading, structure, meter and consumer unit; designers turn that into a layout, string plan and yield estimate; estimators price it. Both UK surveyor adverts in the research sample asked for MCS knowledge. A domestic surveyor, for instance, photographs the loft, measures rafters and notes asbestos or fragile areas. A mistake made at survey shows up later as an unsafe or underperforming installation, so this is not a desk task.
- PV Design Specialist: job task analysis NABCEP · Certification
Battery storage and add-onsabout 1 hour
Batteries, EV chargers and smart controls now come with many solar jobs, and employers expect at least awareness of them.
Seven of the 17 postings sampled for this roadmap named a battery or storage award or skill, and two German postings paired solar with EV chargers or heat pumps. Storage adds stored-energy hazards and extra rules, so it has its own qualification routes, such as the City & Guilds storage award in the UK and NABCEP's ESIP in the US. Example: a hybrid inverter with a home battery that keeps the lights on in a power cut. A battery is not just another box: it can stay live when everything else is off.
- New solar PV and electrical energy storage qualifications City & Guilds · Guide
- Energy Storage Installation Professional (ESIP) NABCEP · Certification
Who employs solar techniciansabout 1 hour
Installer companies, electrical contractors, EPC firms, O&M providers and subcontract work hire in different ways.
Employers range from small domestic installers, through electrical contractors adding solar, to engineering, procurement and construction (EPC) firms, specialist O&M companies and asset owners. Some hire employees; one UK posting in the sample offered subcontract work paid per job. About five of the 17 postings were open to trainees. An MCS-certified installer may take on apprentices while an O&M firm wants experienced test technicians. Find out the employer type before you apply: it shapes your training, your supervision and your pay structure.
- Find an installer (MCS directory) MCS · Tool Shows the kind of certified companies that hire installers in the UK.
- NICEIC: MCS installer scheme NICEIC · Certification Company certification, not for individuals; joining fees apply and are listed on the page.
Practice task
Collect five current adverts for solar installer, technician or O&M roles in your country. For each, write one line on the title, the employer type, the tasks, the qualifications asked for and what you lack. Then write a half-page note naming the first role you will aim for and the next qualification you need.
Skills you build
Reading job advertsRole types in solarEmployer typesCareer route planning
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- O*NET OnLine: Solar Photovoltaic Installers US Department of Labor (O*NET) · Dataset Task list, sample job titles and work context for the US occupation.
- Occupational Outlook Handbook: Solar photovoltaic installers US Bureau of Labor Statistics · Guide US figures; the page's pay and growth numbers are updated each year.
- Job profile: Solar panel installer National Careers Service (UK) · Guide UK entry routes: college, T Level, apprenticeship, or starting as a labourer.
- Renewables jobs see first slowdown amid global deployment growth IRENA and ILO · Guide Worldwide renewable jobs and regional totals from the January 2026 IRENA and ILO review. The site blocks automated readers, so open it in a browser.
- NABCEP certifications overview NABCEP · Certification The page is free; exams and applications are paid.
Live Solar PV technician jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.