Scope 3 across the value chain
Scope 3 is the indirect emissions in a company's value chain that Scopes 1 and 2 leave out. You will screen all 15 categories, choose a method for each and rate the quality of every estimate.
- Core
- Intermediate
- about 30 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Most Scope 3 emissions cannot be measured directly, because the activity happens inside other companies. So estimate all 15 categories roughly, find the few that dominate, and replace weak data with better data where it counts. The GHG Protocol’s Scope 3 Standard says this part of the footprint can be the largest source of a company’s emissions. It starts where Scope 1 and 2 stop, so fix that boundary first.
A furniture maker’s category 1: screen, rank, improve
A furniture maker’s purchase ledger shows GBP 2,000,000 a year on timber and fabric. The firm is imaginary, the figures are illustrative and the factor below is not a real one.
A spend-based factor of 0.5 kg CO2e per GBP gives 2,000,000 x 0.5 = 1,000,000 kg, or 1,000 tonnes. Tag the line “spend-based, low quality”. If this is the largest line in the screen, category 1 gets the effort and the small categories wait. One timber supplier takes GBP 1,500,000 of the spend (75%), so ask it for emissions per cubic metre of the timber you buy, multiply by your volume and re-tag that part “supplier-specific”.
Then watch the trend. If timber prices rise 10% for the same volume, spend becomes GBP 2,200,000 and the spend-based line becomes 1,100 tonnes (2,200,000 x 0.5), though nothing real changed. And when the supplier’s figure replaces the proxy, the total may move purely because the method did. Say so in the method note (the inventory project shows one).
Who holds the data for each category
Each category has a different owner. Finance holds the purchase ledger and asset register (categories 1 and 2), the travel booking system holds trips (6), HR can run the commuting survey (7), and product teams know lifetime and energy use (11). Send each owner a short request naming the exact fields you need, and agree the emission factor dataset before you start, so a later switch is a decision, not an accident.
What you will learn
- Name the 15 categories, split them into upstream and downstream, and say which usually dominate in a given sector.
- Screen categories for relevance with the Standard's criteria: size, influence, risk, stakeholders and outsourcing.
- Estimate a category with a spend-based, average-data, supplier-specific or hybrid method, and explain the trade-off.
- Handle purchased goods, business travel, commuting, use of sold products and investments.
- Record data quality, avoid double counting and plan supplier engagement.
The parts of this topic
The 15 categoriesabout 3 hours
Eight upstream categories and seven downstream ones that together describe all indirect emissions in a value chain.
Upstream: 1 purchased goods and services, 2 capital goods, 3 fuel- and energy-related activities not in Scope 1 or 2, 4 upstream transportation, 5 waste generated in operations, 6 business travel, 7 employee commuting, 8 upstream leased assets. Downstream: 9 downstream transportation, 10 processing of sold products, 11 use of sold products, 12 end-of-life treatment, 13 downstream leased assets, 14 franchises, 15 investments. Never skip a category without writing down why. Example: a retailer's largest category is often purchased goods (1), a bank's is usually category 15.
- Scope 3 Standard factsheet GHG Protocol · Guide
- Diagram of scopes and emissions across the value chain GHG Protocol · Standard
Screening and relevanceabout 3 hours
Decide which categories are worth measuring first using the Standard's relevance criteria, and document the decision.
The Scope 3 Standard lists criteria for finding relevant activities: size, influence, risk, stakeholders, outsourcing, sector guidance and any others the company sets. Start with rough estimates for all 15 categories, then spend effort where the numbers are large or where the company can act. Exclude a category because it is not relevant, never because the data are hard to get. For a software firm, purchased cloud services and employee commuting may dominate, while use of sold products may be small.
- Scope 3 Standard: detailed FAQ GHG Protocol · Guide
Spend-based, average-data, supplier-specific, hybridabout 5 hours
Four ways to estimate a category, ranging from rough money-based factors to measured supplier data.
A spend-based estimate multiplies money spent by an emission factor per unit of currency. An average-data estimate multiplies a physical quantity (kg, km, tonnes) by an average factor. A supplier-specific estimate uses emissions data from the supplier or the product. A hybrid mixes them. Among the Scope 3 Standard's examples are 'quantity of money spent' with 'kg CO2 per unit of currency spent'. Publish spend-based numbers as estimates, not as precise figures. Example: start spend-based for all purchases, then replace the top ten suppliers with their own data.
- US Environmentally-Extended Input-Output (USEEIO) technical content US EPA · Dataset The model behind US spend-based factors.
- GHG Emission Factors Hub US EPA · Dataset
Purchased goods, services and capital goodsabout 4 hours
Categories 1 and 2 are often the largest; they usually start with spend data from the finance system.
Category 1 covers the cradle-to-gate emissions of everything you buy, and category 2 covers capital goods such as equipment and buildings. Start with the purchase ledger, group spend by supplier category and apply spend-based factors. Multi-regional input-output databases such as EXIOBASE give factors by country and sector. A manufacturer's raw materials and a retailer's stock often dominate its inventory. Watch for double counting between categories, for example freight counted in both category 1 and category 4.
- EXIOBASE EXIOBASE consortium · Dataset A multi-regional input-output database; check its terms of use before commercial use.
Business travel and employee commutingabout 3 hours
Categories 6 and 7 are small for many companies but easy to start with because the data are accessible and factors are public.
Business travel covers flights, rail, taxis and cars the company does not own, and the Standard makes hotel stays optional; commuting covers employees travelling to work, often estimated from a survey. UK government conversion factors include travel factors, and the 2026 set is listed on the DESNZ collection page (as read on 20 November 2026). Flight data can come straight from a travel booking system, which gives the distance and class of flight for each trip. A distance-only flight factor misses the effect of cabin class, and a survey with a tiny response rate should not be extrapolated to the whole workforce.
- Greenhouse gas reporting: conversion factors 2026 UK Government (DESNZ) · Dataset
Use of sold products and downstream categoriesabout 3 hours
For manufacturers, emissions when customers use the product may exceed everything else in the inventory.
Category 11 counts emissions from the use of products you sell: fuel burned by a car, electricity used by an appliance over its life. It requires assumptions about lifetime and use. The Standard puts direct use-phase emissions in the category's minimum boundary and treats indirect use-phase emissions as optional. For a vehicle maker, use-phase emissions dwarf its factories. Product-level carbon footprints, covered in the GHG Protocol's Product Standard, can help. Keep the lifetime assumption fixed from year to year, or note each change; otherwise the trend means nothing.
- Product Standard GHG Protocol · Standard
Category 15: investmentsabout 3 hours
Financial institutions' largest emissions are those financed by loans and investments, counted under category 15.
Category 15 counts emissions associated with investments in the reporting year, including equity, debt and project finance. For banks and investors it can be many times larger than Scopes 1 and 2. If attribution methods or data qualities differ across portfolios, say so, or the totals cannot be compared. The Partnership for Carbon Accounting Financials (PCAF) provides methods for financed emissions across asset classes; a bank, for instance, allocates a share of a borrower's emissions in proportion to its loan.
- Partnership for Carbon Accounting Financials PCAF · Standard
Data quality and double countingabout 2 hours
Rate each estimate, prefer better data over time, and make sure one tonne is not counted twice.
A data-quality rating records whether an estimate rests on supplier measurements, industry averages or spend-based proxies, so readers know how firm it is. The Scope 3 Standard says the 15 categories are designed to be mutually exclusive, so that for one reporting company there is no double counting between categories. Double counting can still arise inside your own spreadsheet, for example when one invoice is mapped to two categories. A single total with no hint of uncertainty hides how firm the number is, so tag each line with its method and quality.
- Scope 3 Standard: frequently asked questions GHG Protocol · Guide
Supplier engagementabout 4 hours
Ask suppliers for their own data in a structured way, and know the formats and platforms they already use.
Better data come from suppliers who measure their own emissions. GHG Protocol's supplier engagement guidance describes a programme: plan internally, select suppliers, announce the programme before any survey, train suppliers, check in, assess data quality and follow up. CDP's supply chain programme and the PACT network are other routes. A long questionnaire sent to everyone tends to produce low-quality answers, so ask, for example, the twenty suppliers behind 60% of spend for site-level energy use rather than all suppliers for everything.
- Supplier engagement guidance GHG Protocol · Guide
- Supply chain guidance US EPA Center for Corporate Climate Leadership · Guide
- PACT: Partnership for Carbon Transparency WBCSD PACT · Community
Scope 3 Evaluator (retired): other screening routesabout 2 hours
GHG Protocol's free Scope 3 Evaluator closed on 30 August 2023, so do the first screening estimate with the Standard's categories, finance data and public factor sets.
GHG Protocol and Quantis built the Scope 3 Evaluator as a free web tool for measuring, reporting and reducing value chain emissions, but its page says access ended on 30 August 2023, so older guides that recommend it are out of date. For a first screening estimate, rate all 15 categories with the Standard's relevance criteria, apply spend-based factors to the purchase ledger and compare the result with what you know of the sector. Doing this before a supplier survey shows which categories deserve attention. A rough screen is a starting point, not an inventory.
- Scope 3 Evaluator (retired) GHG Protocol and Quantis · Tool The page announces the tool's retirement on 30 August 2023.
Practice task
For a company in a sector you choose, build a Scope 3 screening sheet: all 15 categories, a relevance score with one line of reasoning each, the method you would use, the data you need and its source, and a data-quality rating. Then calculate two categories (for example business travel and purchased goods) from sample data and write a short method note.
Skills you build
Scope 3 category screeningSpend-based and average-data methodsSupplier-specific dataData-quality ratingDouble-counting checksSupplier engagement
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Corporate Value Chain (Scope 3) Standard GHG Protocol · Standard
- Corporate Value Chain (Scope 3) Accounting and Reporting Standard (PDF) GHG Protocol · Standard
- Scope 3 Calculation Guidance GHG Protocol · Standard
Live ESG analyst jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.