Stage 4: Everyday safety hazards · topic 13 of 50

Machinery, height, handling, slips and trips

The injury hazards found in most workplaces: machine guarding, work at height, manual handling, slips and trips, housekeeping, site traffic, PPE and equipment checks. You will be able to inspect a site and choose controls.

  • Core
  • Beginner
  • about 14 hours

Part of the EHS officer roadmap: how to become one and what to learn

Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps

Walking a site, asking why things are done the way they are, ranking what you find and choosing each control from the top of the hierarchy down: the same method covers all eight hazards. The skill is less knowing eight rulebooks than looking at a real workplace and seeing which hazard is about to hurt someone.

Findings from a walk round a small warehouse

This is an illustrative walk-through, not advice for a real site. One visit turns up five things:

  1. A conveyor guard has been taken off, and the operator clears jams by hand.
  2. Pallets are stacked in front of a fire exit.
  3. Pedestrians cross the lift-truck route to reach the canteen.
  4. A pipe leaks onto a walkway.
  5. Staff use a stepladder every day to reach the top shelf.

Rank them by severity and likelihood, and write the reason beside each; risk assessment step by step covers the scoring. The conveyor goes first: it is the most severe, and it happens every jam. Fix the pallets before you leave, because moving them costs nothing. OSHA’s hazard identification guidance says simple hazards should be fixed as they are found, and the fire and emergency topic picks up the blocked exit.

Choosing each control from the top

Pick controls from the top of the hierarchy of controls. For the conveyor, ask the operator why the guard came off. If the answer is “it jams every hour”, look for a fix at source, such as an access hatch or a cause for the jams, plus an isolation routine for clearing them. For the stepladder, ask whether the stock can be stored lower, so no one climbs at all. For the pedestrians, separate the route first. Marking a crossing is the weaker option.

Record it so it gets fixed

Some of these hazards carry their own rules: electrical, lifting and pressure equipment covers the plant side. For each finding, take a photo or sketch, write the proposed control and name an owner. A list that says “improve housekeeping” will not be closed. One that says “move pallets from exit B, owner: warehouse lead, today” will. Come back and check, and say so when something has been fixed, because people stop pointing out hazards when nothing visibly changes.

What you will learn

  • How machines injure people and what safeguards work.
  • The hierarchy for work at height: avoid, prevent, minimise.
  • How to avoid, assess and reduce manual handling risk.
  • What causes slips and trips and what prevents them.
  • How housekeeping and traffic routes affect injury rates.
  • How to choose PPE only after other controls, and how to check equipment before use.

The parts of this topic

Machine guardingabout 2 hours

Safeguards keep people away from moving parts. They must be complete, hard to bypass and backed by safe systems for maintenance.

HSE says moving machinery can strike, draw in, cut, crush, burn or electrocute, and that safeguards include guards, interlocks, two-hand controls, light guards and pressure-sensitive mats. PUWER expects guarding, emergency stops, adequate isolation from energy and clear markings. OSHA's machine guarding page focuses on amputation hazards. If a safeguard is inconvenient or easy to override, find out why people bypass it. Example: a conveyor guard removed to clear jams points to a design problem to fix before anyone is disciplined.

Work at heightabout 2 hours

Avoid work at height where reasonably practicable, prevent falls with safe places or the right equipment, and only then reduce the distance and consequences of a fall.

HSE defines work at height as any place where, without precautions, a person could fall a distance liable to cause injury. Its order is to avoid the work, prevent falls, then minimise the distance and consequences, with collective protection such as guardrails before personal protection such as harnesses. Ladders are not banned and suit low-risk, short tasks. A harness with no safe anchor point or rescue plan protects no one. OSHA says fall protection is required at four feet in general industry, five in shipyards, six in construction and eight in longshoring, and over dangerous machinery whatever the height (as read on 20 November 2026).

Manual handlingabout 2 hours

Avoid hazardous handling, assess what cannot be avoided by looking at the task, load, environment and person, and reduce the risk with aids and better task design.

HSE says the law asks employers to avoid hazardous manual handling so far as reasonably practicable, assess what cannot be avoided and reduce the risk as low as reasonably practicable. It sets no specific weight limit. Assessment looks at the task, the load, the working environment and individual capability, and HSE's MAC tool helps with lifting, carrying and team handling. Controls start with mechanical help such as trolleys and hoists, then change the task and workplace, with training last. A technique talk is a weak answer when a trolley would remove the lift.

Slips and tripsabout 2 hours

Most slip and trip prevention is about contamination, cleaning, flooring, footwear and the environment, and everyone from designer to worker has a part.

A leaking pipe over a walkway is a contamination problem to fix at source: a warning sign and a mat leave the leak running. HSE's guidance on causes and prevention covers contamination, cleaning, people and human factors, flooring, the environment and slip-resistant footwear, with roles for employers, workers and designers. OSHA's walking-working surfaces rule, in force since January 2017 for most requirements, updated its general industry standards for slip, trip and fall hazards and added training and inspection requirements.

Housekeepingabout 2 hours

Tidy, well-maintained workplaces have fewer trips, fires and blocked exits. Fixing simple hazards on the spot builds trust in the safety system.

The Irish HSA notes that less obvious hazards, at the root of many accidents, come from untidy workplaces and poor maintenance. OSHA's hazard identification guidance says housekeeping and tripping hazards should be fixed as they are found, which shows safety leadership. Pallets stacked in an exit route, for instance, are a fire and evacuation problem as well as a trip hazard. An annual clean-up week resets the clock; a daily standard keeps it from running down, so set clear standards, such as marked storage and aisles, and inspect against them regularly.

Workplace traffic and pedestriansabout 2 hours

People are knocked down, run over or crushed against fixed parts by vehicles, so separate vehicles and pedestrians and plan loading areas.

HSE says people are knocked down, run over or crushed by vehicles such as HGVs, lift trucks and tractors, and also fall from vehicles when getting on or off, working at height or loading. Your risk assessment should cover loading and unloading, and marking traffic and pedestrian movements on a plan shows where they meet. Design for pedestrians as well as vehicles, or people will find their own route. HSE's site layout guidance covers traffic routes, surfaces, signs, lighting, parking and loading areas.

PPE selectionabout 2 hours

PPE comes after other controls. A hazard assessment selects it, it must fit and be maintained, and workers must be trained to use it.

HSE says employers must provide PPE free of charge where a risk assessment shows it is needed, after engineering controls and safe systems of work have been applied, and that it must be fit for purpose, maintained, stored, supplied with instructions and used correctly. Respirators, for instance, need the right type and a fit check, and one glove size for everyone does not control the hazard. OSHA's PPE standard requires a hazard assessment with written certification, PPE that fits each affected employee and training on when and how to use it.

Equipment checks and maintenanceabout 2 hours

A quick check before use is often enough for simple equipment. Equipment with significant risk needs formal inspection, and maintenance must itself be planned safely.

Formal inspections alone leave gaps between visits. HSE says a quick visual check before use is often enough, but equipment where significant risk could arise from installation or deterioration needs formal inspection at frequencies set by risk assessment, with a record kept at least until the next inspection. Example: a daily ladder and guard check by the user, and a formal inspection of a mezzanine. HSE's maintenance guidance says maintenance always involves non-routine activities that can expose people to risks, and that unsafe maintenance has caused many fatalities and serious injuries.

Practice task

Walk a real workplace, a school or a shop if you cannot access a site, with a checklist built from the eight subtopics. Record ten findings with a photo or sketch each, rank them by risk, suggest one control per finding using the hierarchy of controls and write a two-page inspection report.

Skills you build

Machine safeguardingWork at height planningManual handling assessmentWorkplace inspectionPPE selection

Resources for this topic

Every source here is free. Each link opens the provider's own site in a new tab.

Back to the whole roadmap

Live jobs

Live Environmental, health and safety (EHS) officer jobs

Roles whose title matches this career path.

All Environmental Health & Safety jobs

Spot a problem with this topic?

Tell us what is wrong, missing or unclear here. Your note is attached to this topic.

Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.