Stage 1: Orientation: what EHS is · topic 2 of 50

Hazard, risk and the hierarchy of controls

A hazard is what can hurt someone, risk is how likely and how badly, and controls are what you do about it, best first. You will be able to rank risks and choose controls in the right order.

  • Core
  • Beginner
  • about 8 hours

Part of the EHS officer roadmap: how to become one and what to learn

Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps

Which control do you reach for first? The order is fixed: name the hazard and who it could hurt, judge how likely and how serious the harm would be, then choose controls from the top of the hierarchy and move down only when you can say why. Whatever remains is residual risk, and it gets written down with an owner and a review date.

Cleaning parts in a solvent bath

A technician in a small engineering plant cleans machined metal parts by hand in an open bucket of solvent. This is an illustrative walk-through, not advice for a real site, and the scores are invented.

The hazards are vapour, skin contact and fire if the solvent is flammable. Before controls, likelihood is 4 of 5 (every shift, open bucket) and severity is 3 of 5 (health harm, possible fire): 4 x 3 = 12, with the reasons written beside it.

Going down the hierarchy is a run of questions. Can the parts arrive clean? No, they are machined on site, and the reason for rejecting this option goes on record. Is there a safer liquid? A water-based cleaner, after reading its own safety data sheet. Can the process be enclosed? An enclosed parts washer with a lid. What is left for time limits and gloves? Gloves matched to the safety data sheet, plus time limits, for what remains.

The choice is the substitute plus the lidded washer. Re-scored, likelihood falls to 2 because the lid keeps vapour in, and severity to 2 because the liquid is milder: 2 x 2 = 4. Topping up and emptying the washer still involves handling, so it stays on the sheet as residual risk. The written form of this analysis is in risk assessment step by step.

What the top control costs

NIOSH says engineering controls can cost more upfront than administrative controls or PPE, but long-term operating costs tend to be lower, especially when they protect several workers. Compare cost over the life of the control, not the purchase price. If you still pick a lower level, write down why. Which legal test applies depends on where you work: see workplace safety law of your region.

Controls that get worked around

Ask the people who do the task whether a control slows or complicates it. If it does, expect it to be worked around, and look for a version that fits the work. HSE says to review controls after accidents or near misses, so the sheet is never finished: see incident investigation and root cause analysis.

What you will learn

  • The difference between a hazard, the risk it creates and the harm that follows.
  • How likelihood and severity combine to rank risk.
  • The five NIOSH levels of control, why PPE comes last and why designing a hazard out is cheapest.
  • What residual risk is and who has to know about it.
  • How the UK 'reasonably practicable' test differs from the US 'recognized hazard' wording.
  • Why a near miss is a free lesson.

The parts of this topic

Hazard, risk and harmabout 1 hour

A hazard is something with the potential to cause harm, risk is the likelihood and severity of that harm actually happening, and harm is the injury or illness.

A wet floor is a hazard. The risk is how likely someone is to slip and how badly they could be hurt. The harm is the broken wrist. People often write "risk" when they mean hazard, and end up with a long list that ranks nothing. A forklift, for instance, is a hazard everywhere, but the risk is higher in a busy loading bay with pedestrians. The Irish Health and Safety Authority defines a hazard as anything with the potential to cause harm, and risk as the likelihood of an undesired event together with the severity of its consequences.

Likelihood and severityabout 1 hour

Ranking risk means judging how likely harm is and how serious it could be, then using that ranking to decide what to fix first.

OSHA's hazard identification guidance says to work out the severity and likelihood of an incident for each hazard, then use that to prioritise corrective action. Many sites turn this into a five-by-five score, but a score of 12 against 15 is a judgement, not a measurement, so write your reasoning next to the number. Example: a missing guard on a press may be rare but severe, so it ranks above a frequently scuffed but minor trip hazard. Fix simple hazards on the spot while you rank the rest.

The hierarchy of controlsabout 1 hour

From most to least effective: elimination, substitution, engineering controls, administrative controls and PPE. Reach for the top of the list first.

NIOSH describes five levels, from most to least effective. Elimination removes the hazard. Substitution replaces it with something safer, so check the substitute for new risks. Engineering controls, such as guards, barriers and ventilation, keep the hazard away from people. Administrative controls change how work is done: training, rotation, limiting access. PPE protects one person and works only if it is used correctly every time. Training and PPE are quick and cheap, so it is tempting to start there; for a noisy machine, though, quieter equipment beats a noise-reduction rota, which beats ear defenders.

Prevention through Designabout 1 hour

The cheapest time to remove a hazard is before the equipment, building or process exists, so designers carry legal duties in several regions.

NIOSH notes that elimination and substitution are simplest and cheapest at the design stage, and the law reflects this. Under the UK CDM Regulations, designers must eliminate foreseeable health and safety risks where possible and pass on what they cannot remove. India's OSH Code, section 9, tells architects, project engineers and designers to consider the safety and health of building workers at the planning stage. Specifying a roof with permanent edge protection, for instance, avoids every future fall-arrest rig. Design is not someone else's problem, so join the design review.

Residual riskabout 1 hour

Residual risk is what remains after controls. It has to be stated, passed to the people who face it and kept under review.

No control removes all risk, and writing "low" without saying why leaves the next person unable to challenge it. HSE's machinery guidance says suppliers must tell buyers about residual risks that could not be designed out, and users must build those into their safe system of work. Example: a guard stops access to moving rollers, but the residual risk during jam clearing needs an isolation procedure and training. Record the residual risk in the assessment, say who accepted it and when it will be reviewed.

'Reasonably practicable' and 'recognized hazard'about 1 hour

UK law asks for what is reasonably practicable, balancing risk against effort. US law asks employers to keep workplaces free of recognized hazards likely to cause serious harm.

HSE says the Health and Safety at Work Act asks employers to do what is reasonably practicable, which means balancing the level of risk against the money, time or trouble needed to control it. Section 5(a)(1) of the US OSH Act requires a workplace free from recognized hazards that are causing or likely to cause death or serious physical harm. India's OSH Code, section 6, also uses "as far as is reasonably practicable" for the working environment. The tests differ in wording and in how enforcement argues them, so learn the one for your region. Do not quote a test from memory in a report: check the text.

Near misses as free lessonsabout 1 hour

A near miss is an event that could have caused harm but did not. Investigating it finds hazards before anyone is hurt.

People stop reporting when reports bring blame or no visible action, so always tell reporters what was changed. HSE's management guidance says to investigate accidents, near misses and dangerous occurrences to find out why controls failed and improve them. OSHA's guidance lists investigating injuries, illnesses, incidents and close calls as a way to uncover underlying hazards. When a pallet slips from a forklift without hitting anyone, the cause may be a damaged pallet type used across the site.

Practice task

On paper only, pick one ordinary task, such as changing a ceiling light or moving a delivery. Write a one-page analysis: the hazards, who could be harmed, a likelihood and severity score with your reason, one control at each level of the hierarchy, and the residual risk after the controls you would choose.

Skills you build

Hazard identificationRisk rankingChoosing controlsRecording residual risk

Resources for this topic

Every source here is free. Each link opens the provider's own site in a new tab.

Back to the whole roadmap

Live jobs

Live Environmental, health and safety (EHS) officer jobs

Roles whose title matches this career path.

All Environmental Health & Safety jobs

Spot a problem with this topic?

Tell us what is wrong, missing or unclear here. Your note is attached to this topic.

Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.