Risk assessment step by step
A risk assessment finds hazards, rates the risk, chooses controls, records the result and reviews it. You will run one with the person who does the job, as a task assessment, JSA or JHA, or RAMS.
- Core
- Beginner
- about 10 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
The five steps go in order, and they are done with the person who does the job, because that person knows what goes wrong on a wet Monday. Whatever the form is called, the steps are the same: find hazards, judge the harm, choose controls, record, review. Keep the output short enough that the crew will read it.
Loading a van with the driver
At a small depot, drivers load parcels into vans in the yard. This is an illustrative walk-through, not advice for a real site, and the 1 to 5 scales and every score are invented.
At the desk you list two hazards, and likelihood times severity gives the score: back strain from lifting parcels is 4 x 2 = 8, and being struck by a moving vehicle in the yard is 2 x 5 = 10.
Then you walk the task with the driver, who adds a third: the yard is wet after rain most mornings. Slipping scores 3 x 2 = 6. A desk assessment would have missed it.
The vehicle strike ranks first even though it is rarer, because the harm could be fatal. Controls come from the hierarchy: a separate walkway and vehicle route, a rule that nobody loads while a vehicle moves in the yard, a roller bench to bring parcels to the door, and drainage or a covered loading area, with non-slip footwear for what remains. Re-scoring gives 1 x 5 = 5 for the vehicle, 2 x 2 = 4 for the lifting and 2 x 2 = 4 for the slip. The vehicle risk stays highest because its severity cannot change, so it goes on the sheet as residual risk with an owner and a review date.
Area, job hazard analysis or RAMS
An area assessment suits a place whose hazards are there whoever works in it. A job hazard analysis suits a repeated task with steps, like the van above. RAMS suit a one-off job by a crew, often contractors, so the supervisor gets the method together with the hazards. For process plant with many ways to fail, the structured studies in HAZID, HAZOP, FMEA and bow-tie basics go further than a matrix, and any new machine or substance should go through management of change.
The names adverts use
Adverts name this work in several ways: 15 of the 18 postings in our sample (UK, Ireland, EU, US, India, Middle East and Asia; how we research roadmaps) asked for risk assessment, RAMS, JSA or HIRA, so all four names are worth knowing. Controls and residual risk are explained in hazard, risk and the hierarchy of controls, and high-risk jobs then move into permits and safe systems of work.
What you will learn
- The five steps and what the law asks as a minimum.
- When to assess a place and when to assess a task.
- How to use a risk matrix and where it misleads.
- How to run a job hazard analysis (JSA or JHA) with the people who do the job, and how RAMS add a method statement.
- What triggers a review, and how vulnerable workers change the assessment.
- How to record only what matters so people actually read it.
The parts of this topic
The five stepsabout 1 hour
Identify hazards, assess the risks, control them, record the findings and review. The legal minimum is to find what could harm people, judge how likely and how bad, and act.
HSE's five steps are identify hazards, assess the risks, control the risks, record your findings and review the controls. Under the Management of Health and Safety at Work Regulations the minimum is to identify what could cause injury or illness, decide how likely and how serious harm could be, and eliminate or control it. The EU directive (Article 9) requires employers to hold a risk assessment, and the German ArbSchG section 5 requires them to find necessary measures by assessing risks. Buying controls before you have identified the hazards and assessed the risks is a common slip.
- Managing risks and risk assessment at work HSE (UK) · Guide
- Council Directive 89/391/EEC (framework directive) EUR-Lex · Law or regulation Article 9 requires a risk assessment.
Task and area assessmentsabout 1 hour
An area assessment looks at a place whoever works there. A task assessment follows one job step by step. Most sites need both.
An area assessment covers hazards present in a place, such as a loading bay or a workshop, but it does not cover every task done in the area. A task assessment follows one job, for example charging a forklift battery, through its steps, people, tools and conditions. The Irish HSA says an employer with several work locations or changing work locations may need a safety statement with separate sections for each. HSE groups common workplace risks, such as slips and trips or working at height, which is a useful checklist for areas.
- Common workplace risks HSE (UK) · Guide
- Safety statement and risk assessment Health and Safety Authority (Ireland) · Guide
The risk matrix and its limitsabout 1 hour
A matrix combines likelihood and severity into a score to set priorities. It is a judgement aid, not a measurement.
OSHA's guidance says to determine the severity and likelihood of incidents for each hazard and use that to prioritise action. A five-by-five matrix does this with scores. Its limits: the same score can come from a rare fatal event or a frequent minor one, which are not equal; scores hide cumulative exposures such as noise or dust; and the number does not pick the control, since the hierarchy does. Arguing whether a risk is a 9 or a 12 matters less than deciding what to do about it. Always write the reasoning beside the score.
- Hazard identification and assessment OSHA (US) · Guide
JSA and JHAabout 1 hour
A job safety analysis or job hazard analysis breaks a task into steps, finds the hazards in each and agrees controls with the people doing the job.
JSA, JHA and HIRA are names for similar methods. OSHA describes a job hazard analysis as a technique that focuses on job tasks to identify hazards before they occur, looking at the relationship between the worker, the task, the tools and the work environment. The booklet advises involving employees, reviewing accident and near-miss history, ranking jobs by likelihood and severity, watching the job and listing each step, then identifying hazards and controls. It stresses that you evaluate the job, not the employee. Example: cleaning a conveyor has steps (stop, isolate, clean, restart), each with its own hazards. Writing it at a desk without the worker is the usual failure.
RAMS and method statementsabout 1 hour
A risk assessment and method statement (RAMS) pairs the hazards and controls with the sequence of work, so supervisors and crews can follow it.
A generic RAMS pack copied from a previous job does not describe this job. The Irish construction sector has a standard RAMS template and a Safe Plan of Action that, the HSA says, work together to help plan, manage and supervise work safely. The HSA says the employer selects a responsible person to take ownership of developing the RAMS, overseeing the work and keeping it reviewed in consultation with others, and describes its template as three steps and eight sections.
- Risk Assessment Method Statement (RAMS) guidance document Health and Safety Authority (Ireland) · Guide
- Safe Plan of Action and Risk Assessment Method Statement Health and Safety Authority (Ireland) · Guide
Review triggers and changing conditionsabout 1 hour
Reassess when controls may have stopped working, when the work changes or after incidents. Workers also need to stop and re-check when conditions differ on the day.
HSE says to review if controls may no longer be effective, if the workplace changes (staff, processes, substances or equipment), and after worker concerns, accidents or near misses. An assessment dated three years ago that nobody has reopened is the warning sign. Teach workers a quick on-the-spot check before and during a task, often called dynamic risk assessment, and the right to stop when conditions differ from the written assessment: on a roof job, wind may pick up during the lift. That habit supplements the written assessment and never replaces it.
- How to manage health and safety HSE (UK) · Guide Plan, do, check, act, including monitoring and review.
Vulnerable workersabout 1 hour
Young people, new and expectant mothers and disabled workers may face different risks, so assessments must consider them.
HSE says young people under 18 have the same protections as other workers but are likely to be new to the workplace, may be more at risk in their first six months and may need more supervision. For pregnant workers and new mothers, HSE says employers must complete an individual risk assessment once informed in writing. HSE also publishes principles for supporting disabled workers and those with long-term conditions. The EU directive (Article 9) refers to groups exposed to particular risks. Do not assume the generic assessment covers everyone.
- Young people at work: employers HSE (UK) · Guide
- Protect pregnant workers and new mothers: employers HSE (UK) · Guide
- Disability and health conditions at work HSE (UK) · Guide
Recording what mattersabout 1 hour
Record the significant hazards, who may be harmed and the controls so people can use the document. Paperwork alone protects no one.
HSE says that if you employ five or more people you must record significant findings: the hazards, who might be harmed and how, and what you are doing about it, while warning not to rely purely on paperwork. A 40-page assessment that supervisors have never read protects nobody. HSE's template page warns that copying an example and adding your company name will not satisfy the law. Germany's ArbSchG section 6 requires documents showing the assessment, the measures and the review, with summary information where risks are similar.
- Arbeitsschutzgesetz (ArbSchG), English translation Federal Ministry of Labour and Social Affairs (Germany) · Law or regulation Section 6 covers documentation.
Practice task
Choose a real task, such as loading a van, cleaning a machine or changing a gas cylinder. Walk it with someone who does it, write a one-page job hazard analysis with controls ranked by the hierarchy, a review date and a named owner, then ask the worker to mark anything you got wrong and revise it.
Skills you build
Risk assessmentJob hazard analysisRAMSRisk matrix judgementRecording findings
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Steps needed to manage risk HSE (UK) · Guide The five steps, recording from five employees and review triggers.
- Risk assessment template and examples HSE (UK) · Template HSE warns against copying an example with a new company name.
- OiRA online risk assessment tools EU-OSHA · Tool Sector tools for small firms; the page does not state a price.
- BeSMART.ie risk assessment and safety statement tool Health and Safety Authority (Ireland) · Tool
Live Environmental, health and safety (EHS) officer jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.