Stage 5: Health hazards and wellbeing · topic 17 of 50

Chemical safety, safety data sheets and COSHH/HazCom

How to find out what is hazardous on a site, read a label and a safety data sheet, assess the risk under COSHH or HazCom, and store and substitute chemicals sensibly. You will be able to vet a new product before it arrives.

  • Core
  • Beginner
  • about 12 hours

Part of the EHS officer roadmap: how to become one and what to learn

Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps

The same drum can burn, harm a worker through the skin, reach a drain and become waste, so one chemical question touches health, safety and environment at once. The order of work is to learn what is on the site, read the label and safety data sheet for each product, assess the task that uses it, and only then choose controls.

Vetting a new degreaser before it arrives

Purchasing wants to replace a degreaser, and a cheaper solvent-based one has been found. You get the SDS before the order goes in. The sequence below is an invented example, not a procedure for a real site.

  1. Add it to the inventory with product, supplier, SDS date, location and maximum quantity. If it is not on the list, the training and the spill kit will never cover it.
  2. Read the hazards. If the label shows flammable and skin-irritant pictograms, that decides what you check next.
  3. Read the storage section. Section 7 says what it must not be stored with, which decides where it goes: flammables belong away from oxidisers.
  4. Ask the substitution question. Can a water-based product do the job? Compare the risks as a whole, since a milder product with a worse fire risk is no gain.
  5. Assess the task, not only the product. Is it wiped on or sprayed? Who does it: operators only, or maintenance and contractors too? Use the hierarchy of controls from the top, with gloves as the last layer.
  6. Close the loop. Match the spill kit to the product and update the training. Spills and waste from the clean-up are in spill prevention and response and waste management.

HSE says a safety data sheet is not a risk assessment. The sheet supplies the facts, and your assessment applies them to the real task.

Dust and fume that carry no label

Not everything hazardous has a label. HSE’s COSHH guidance includes wood dust, silica dust and welding fume, made by the work itself. Walk the site asking what is cut, ground, welded or heated, as well as what is bought. For how much of a dust or fume is too much, and how to check, see noise, dust, fumes and exposure limits.

This is general learning material. Legal duties differ by country, so read the current text for your region.

What you will learn

  • What a hazardous substance is, including dust, fume and vapour made by the work itself, not only products with a warning label.
  • How to read a supplier label and the sections of a safety data sheet, and why a data sheet is an input to your risk assessment, not the assessment.
  • The steps of a COSHH assessment in Great Britain and the matching duties under the OSHA Hazard Communication Standard in the United States.
  • How to store incompatible chemicals apart, keep a chemical inventory and prepare for a spill before it happens.
  • How to ask the substitution question first: can a less hazardous substance or form do the same job?

The parts of this topic

Labels, pictograms and safety data sheetsabout 1 hour

Read a supplier label and a 16-section safety data sheet quickly and know which sections an officer uses most.

A label gives the quick warning: a pictogram, a signal word and short statements. The safety data sheet gives the detail in a fixed format: identification, hazards, ingredients, first aid, fire, spills, handling and storage, exposure controls, then disposal and regulatory information. Section 7, for instance, tells you what the product must not be stored with. HSE says a safety data sheet is not a risk assessment, so filing the SDS does not finish the job. Check the SDS date too, because an old sheet may predate a classification change.

The COSHH assessmentabout 1 hour

Identify the harmful substances, decide who is exposed and how, choose controls, record the result and review it.

A COSHH assessment looks at hazards from substances, including ones the process creates, such as wood dust, silica dust or welding fume. Work out who could be exposed (include maintenance staff and contractors), by which route (breathing, skin, swallowing), how often and for how long, then decide the controls. For instance, pellets instead of powder reduce dust at source. A generic form that lists the product but never says how the task is done gives controls that do not match the real exposure.

The OSHA hazard communication programmeabout 1 hour

The US duty to keep a written programme, a chemical list, labels, data sheets and worker training.

Under the OSHA Hazard Communication Standard an employer keeps a written programme that covers the list of hazardous chemicals present, container labelling, access to safety data sheets and employee training. OSHA states the SDS format is uniform and has 16 sections. Chemical lists go stale quietly: a new cleaning product arrives, nobody adds it and the training never mentions it. As for SDS access, a warehouse might keep a binder or an online library of SDSs that every shift can reach without asking a manager.

Storage, segregation and chemical warehousingabout 1 hour

Keep incompatible chemicals apart, store them in suitable containers and areas, and plan for what happens if one fails.

Storage decisions come from the SDS handling and storage section and from the substance classification: acids away from bases, oxidisers away from flammables, containers that suit the product, ventilation and a way to hold a leak. A drum store with a bunded floor and separate cages for incompatible classes is one way to do it. Convenience storage, such as a shelf by the work area, slowly collects more than the risk assessment assumed. HSE publishes a free book on storing packaged dangerous substances.

Chemical inventory and looking chemicals upabout 1 hour

Keep one live list of what is on site, in what quantity, and learn where to look up an unfamiliar substance.

An inventory underlies assessments, storage plans, emergency plans and, in the United States, annual reporting. A spreadsheet with product, supplier, SDS date, location, maximum quantity and hazard classes, updated whenever purchasing orders something new, is a workable form, and it should count small quantities spread across many rooms, not only bulk stores. In the US, EPA's inventory reporting rules under EPCRA use quantity thresholds that depend on the chemical, so check EPA's current page.

Flammable liquids and explosive atmospheresabout 1 hour

Understand why flammable vapour, dust and gas need their own controls: ignition sources, ventilation, storage and zoning.

Flammable liquids give off vapour that can ignite when it meets an ignition source, and dust clouds can explode too. The controls are to reduce the quantity, keep vapour away from ignition sources and ventilate. Decanting solvent from drums using earthed equipment in a ventilated area is one example of these controls. In Great Britain the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) cover these risks. A flammables cabinet is part of the answer, not all of it: look at where the product is used.

Spill kits and chemical emergency planningabout 1 hour

Plan for foreseeable spills and exposures: kits, procedures, trained people, casualty care and waste from the clean-up.

HSE's COSHH guidance says to plan and practise for foreseeable accidents: the right equipment (spill kit, protective equipment, decontamination), procedures for a casualty, trained people and a way to deal with the waste the clean-up creates. A spill kit matched to the chemical classes held on that floor, with a sign saying who is trained to use it, is the practical form. A generic kit may not suit the chemical, and rehearsal is how staff avoid meeting their first spill during a real one.

Substitution and eliminating the hazardabout 1 hour

Ask first whether a safer substance or a less hazardous form can do the job, and check the substitute does not create a new problem.

Substitution replaces a hazardous substance or process with a safer one: a liquid for a powder, pre-packed material instead of weighing out by hand, a water-based product instead of a solvent-based one. HSE describes a seven-step decision process. Compare risks before swapping: a safer toxicity profile can come with a worse fire risk. NIOSH ranks substitution second only to elimination. Example: switching a degreaser to a less hazardous product removes the need for respirators.

Practice task

Pick five products from a workshop, kitchen or lab. Build a one-page chemical register with the hazard labels, the key SDS sections, who is exposed and the control you would choose, and add a COSHH-style assessment for the riskiest one.

Skills you build

Safety data sheet readingCOSHH assessmentHazard communicationChemical storage and segregationSubstitution

Resources for this topic

Every source here is free. Each link opens the provider's own site in a new tab.

Back to the whole roadmap

Live jobs

Live Environmental, health and safety (EHS) officer jobs

Roles whose title matches this career path.

All Environmental Health & Safety jobs

Spot a problem with this topic?

Tell us what is wrong, missing or unclear here. Your note is attached to this topic.

Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.