Incident investigation and root cause analysis
Investigate an incident or near miss to find the system causes behind it, write findings that managers can act on, and track each fix until you have checked it worked.
- Core
- Intermediate
- about 14 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
A near miss that might have killed someone deserves a real investigation, so scale the effort to what could have happened, not only to what did. The order is: secure the facts, then find the causes, then choose fixes, and keep opinions out until the evidence is in. HSE’s HSG245 and OSHA’s guide both follow that order in four steps.
A jammed conveyor, asked why five times
An operator’s glove is pulled into the in-running nip of a packing-line conveyor. The hand is bruised, nothing is broken. This is an invented near miss, not a real case.
The evidence points one way. The guard was open while the belt ran, the interlock had been reported faulty three weeks earlier, and a jumper wire was fitted across it. Now ask why:
- Why was the hand drawn in? The guard was open with the belt running.
- Why? The interlock was bypassed with a jumper.
- Why? The belt jams most shifts, and the interlock stops the line each time.
- Why was the fault still there? The repair request sat in the general queue behind routine jobs.
- Why? The maintenance procedure has no category for safety-critical defects, and nobody checks for bypasses.
Stop at step 5: it is something management can change. “Operator reached in” is the immediate cause, and a reminder to operators would fix nothing. For what a blame-first reflex does to your evidence, see safety culture and human factors.
Actions that can be checked
Each action gets an owner, a date and a test:
- Repair the interlock now (maintenance lead, today, inspected by the supervisor).
- Add a safety-critical defect category with a response time (maintenance manager, one month, procedure issued and a sample of requests reviewed).
- Weekly bypass check on every guard interlock (line supervisors, from next week, check sheet reviewed monthly).
- Redesign the chute that causes the jams (engineering, three months, jam stops counted before and after).
The last item removes the reason to bypass, so it sits higher on the hierarchy of controls than the supervisor check. Close each action when the test passes, and ask the people who run the line whether a fix will work in practice. Then feed what was learned back through incident reporting so the register shows it.
Method names in adverts
Among the 18 job postings sampled (UK, Ireland, EU, US, India, Middle East and Asia; how we research roadmaps), 15 asked for incident or accident investigation, one asked for a lead accident investigation qualification and one for root cause analysis. Practise the plain method first, on the published cases in major accident case studies, then ask a target employer which named method it uses.
What you will learn
- The four steps in HSE's HSG245 (gather, analyse, identify controls, action plan) and OSHA's incident guide (preserve the scene, collect information, find root causes, correct).
- How to collect evidence from the scene, documents, equipment and interviews, without blaming people early.
- How to ask repeated why questions, and where tools such as fishbone diagrams, fault trees and barrier analysis help.
- How human factors and a just culture change what you find, and what formal methods employers name in adverts.
- How to write an action plan with owners and dates, and verify the actions worked.
The parts of this topic
HSE's four steps for investigationsabout 2 hours
Gather information, analyse it, identify risk control measures, then agree and carry out an action plan.
HSG245 takes an investigator through gathering information, analysing it, identifying risk control measures, and the action plan and its implementation. It is written so any organisation can run its own investigation, and it says investigations should be done with prevention in mind: blaming before the investigation starts is counterproductive because people become defensive. Stopping at the first immediate cause, such as 'operator reached in', leaves the real causes in place. Example: a conveyor injury investigation covers the guard design, maintenance records, training and supervision as well as what the worker did.
- HSG245: free PDF HSE (United Kingdom) · Guide
Evidence, scene and interviewsabout 2 hours
Preserve the scene, photograph it, collect documents and records, and interview people about events rather than motives.
Investigators begin, OSHA's guide says, by preserving and documenting the scene, then collecting information through interviews, document reviews and other means. It lists sources such as equipment manuals, company policies, maintenance logs and training records. In a conveyor example, the maintenance log shows the guard interlock was reported faulty three weeks earlier. Records, equipment and photographs often tell a different story from the first account, and early blame silences witnesses, so recollection alone is not enough.
- OSHA incident investigation topic page OSHA (United States) · Guide
Why-chains, fishbone, fault trees and barrier analysisabout 2 hours
Use repeated why questions and simple causal diagrams to move from the immediate cause to the system cause.
Investigators should keep asking why, OSHA's guide says: if a worker did not follow a procedure, ask why, and then why that happened, because each answer reveals more contributing factors and brings you nearer to the root causes. Fishbone diagrams group causes by category, fault trees work backwards from an outcome, and barrier analysis asks which defences failed. No free primary guide to fishbone diagrams or fault trees is linked here, so use OSHA and HSE for the principles. Three questions is not a rule: stop when the answer is something management can change.
- OSHA safety management: hazard identification and incident investigations OSHA (United States) · Guide Action item 4 covers conducting incident investigations.
Formal methods named in advertsabout 2 hours
Know what employers mean when they ask for lead accident investigation, ICAM or TapRooT, and how to prepare without paying first.
Lead accident investigation, ICAM and TapRooT are named methods or qualifications, usually taught on paid courses. No free primary guide to them is linked here, and ICAM and TapRooT appeared only in search snippets that could not be confirmed. Prepare by mastering the neutral principles in HSG245 and OSHA's guide, then ask the target employer which method it uses. Example: an interview question asks you to talk through the last investigation you led. Run a few investigations before you pay for a method course.
- CSB investigations US Chemical Safety Board · Guide Examples of how a formal investigation body presents a case.
Human factors and just cultureabout 2 hours
Understand why people make errors and violations, and why a blame-first culture hides the causes you need.
HSE's HSG48 examines human error and behaviour and how to identify, assess and control the risks they create. OSHA's guide says to investigate programmes, not behaviours, and to focus on root causes rather than blame. A just culture separates honest error, risky shortcuts and reckless acts, so people keep reporting. In one example, a tired operator makes an error after a double shift, and the finding is about the rota, not the person. A disciplinary reflex teaches workers to hide near misses.
- Organisational culture HSE (United Kingdom) · Guide
- Human factors and ergonomics HSE (United Kingdom) · Guide
Action tracking and verificationabout 2 hours
Turn findings into actions with owners and dates, then check that they were done and that they worked.
The last step of the investigation is the action plan: what will change, who owns it, by when, and how you will know it worked. OSHA's programme guidance talks about correcting shortcomings and verifying that a programme is implemented and operating. An action to add a guard, for example, is closed only after someone inspects the guard and the near-miss rate on that line is checked three months later. Close an action when the change is verified, not when the email is sent.
- OSHA safety management: program evaluation and improvement OSHA (United States) · Guide
How an independent investigation body worksabout 2 hours
See how a non-regulatory body finds root causes and makes recommendations rather than issuing fines.
The US Chemical Safety Board describes itself as an independent, non-regulatory agency that investigates the facts, conditions and circumstances and the cause or probable cause of chemical accidents. It conducts root cause investigations, does not issue fines or citations, and makes safety recommendations. A recommendation may go to an industry association rather than to the single company. Its reports show how a causal chain, a timeline and recommendations fit together, but a minor site incident needs a short, practical report, not that format.
- About the CSB US Chemical Safety Board · Guide
Practice task
Take a real public case, such as a short CSB video or HSE case study, or invent a realistic near miss. Write a two-page investigation report with a timeline, the evidence list, a why-chain down to at least one management-system cause, and an action plan with owners, dates and a verification step.
Skills you build
Incident investigationRoot cause analysisInterviewingEvidence handlingCorrective action tracking
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- Investigating accidents and incidents (HSG245) HSE (United Kingdom) · Guide Step-by-step guide with a free PDF.
- Incident [Accident] Investigations: A Guide for Employers OSHA (United States) · Guide Four-step systems approach with an investigation form, checklists and sample root-cause questions in its appendices.
- Reducing error and influencing behaviour (HSG48) HSE (United Kingdom) · Guide
- Integrated safety, health and environmental management: an introduction The Open University (OpenLearn) · Course About 15 hours, level 3, free statement of participation. Includes a section on analysing incidents and multiple contributing causes.
Live Environmental, health and safety (EHS) officer jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.