Writing the report: narrative, tables, method notes
A sustainability report that a non-specialist can read and an auditor can trace needs metric tables with units, a content index and an honest method note. You will draft all three, plus a one-page summary.
- Core
- Intermediate
- about 20 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Draft in the order an auditor will check, not the order a reader will meet: metric tables first, then the method note that explains them, then the content index, and the summary last. Each later piece is a view of the earlier ones, so if a table is wrong, everything built on it is wrong too.
A restatement, worked through
An imaginary company reported 10,000 tonnes CO2e for 2024 and 10,400 for 2025, a rise of 4%. On 1 January 2025 it bought a site that emitted 1,200 tonnes a year under the previous owner. These numbers are made up for the example.
Read as published, emissions went up. But the 2025 figure includes the new site and the 2024 figure does not, so the comparison is not like with like.
- As published: 10,000 for 2024 and 10,400 for 2025, up 4%.
- Like with like: restating 2024 to include the site gives 10,000 + 1,200 = 11,200 tonnes, and 10,400 / 11,200 = 0.929, a fall of about 7.1%.
The headline flips from +4% to -7.1%. In the report, show both versions of 2024 side by side, say the acquisition caused the change, and put the rule in the method note: the Corporate Standard lists acquisitions among the structural changes that trigger a recalculation, and the company’s own policy sets the threshold.
Limitations, written while you remember the compromises
The method note is cheapest to write at the moment you calculate. Each time you estimate, exclude or substitute, add a line: which site, what you used instead, roughly how much of the total it is. A site that sent no data and was filled in from last year’s actual is a one-line entry now and an hour of detective work at year end. Input checks belong earlier, in running an ESG data cycle with controls.
Reading the draft as a stranger would
Read the summary aloud without using an acronym. Follow each row of the content index to its page, and ask whether it lands on a number or only on a mention; the index format is covered in GRI Standards. A quick test before review: pick five numbers at random and trace each to a source file in two minutes. If you cannot, the note is not finished.
Any claim in the narrative should survive green claims review, and assurance readiness shows what an auditor will ask. Then hand the draft to someone who has not seen the data and ask what they would challenge.
What you will learn
- Organise a report so governance, strategy, risk, performance and targets can each be found quickly.
- Build a metric table with unit, period, boundary and source on every row.
- Write a method note that states what you counted, how, and what you left out.
- Decide when a restatement is needed and explain it to a reader.
- Write a one-page summary and a few slides in plain language.
The parts of this topic
Structure and flow of the reportabout 3 hours
Organise the report so a reader can find governance, strategy, risk management, performance and targets without hunting.
Most frameworks ask for the same few things in different words. IFRS S1, for example, is built around four areas: governance, strategy, risk management, and the metrics and targets used to track performance. Use that spine as the table of contents and add the topic detail beneath it, and investors get a layout they know. A common slip is organising by department (an HR section, an EHS section), which stops a reader following one issue from risk to result.
- IFRS S1 General Requirements (summary page) IFRS Foundation · Standard
Index tables and cross-referencesabout 3 hours
Build a content index that maps every disclosure you claim to the page, table or note where it is answered.
A content index is the reader's map and the auditor's checklist. Each row names the disclosure, says where it is answered, and flags anything omitted with the reason. GRI reporting is built around one. Rows marked as covered where the report only mentions the topic and gives none of the numbers the disclosure asks for are the ones to watch. Build the index while you draft: one added at the end tends to point at the wrong pages.
- Download the GRI Standards GRI · Standard
Metric tables with units and boundariesabout 4 hours
Make every number self-explanatory: unit, period, organisational boundary, method and source on the same row.
A bare figure such as 12,400 is useless. A good row says 12,400 tonnes CO2e, calendar year 2025, operational control, market-based electricity, factor source and date. If the boundary shifts between years, a fall in emissions may only be a change in what you counted. The GHG Protocol Corporate Standard lists what a public report in accordance with it must contain: the boundaries chosen, the reporting period, totals by scope, each gas separately, the base year and the methods used. Use that list as your template.
- GHG Protocol Corporate Standard GHG Protocol · Standard
Method notes and limitationsabout 3 hours
Write down how each figure was produced, which estimates were used and what is left out, so the report can be repeated and challenged.
Three questions make a method note: what did you count, how did you calculate it, and where is the number weak? Name the emission factor set and its year, say which sites or suppliers are estimated and why, and list exclusions with their likely size. 'Data collected from sites' is too vague: an auditor will ask which sites, from whom and on what date, and the note should already answer. The Corporate Standard asks for methodologies and any specific exclusions to be reported.
- UK environmental reporting guidelines including mandatory GHG reporting UK government · Guide Says companies in scope of UK SECR must disclose the methodology used to calculate their figures; the page was last updated on 29 March 2019
Restatements and comparativesabout 3 hours
Explain when prior-year figures are changed, how the base year is recalculated, and how to tell the reader what moved and why.
Under the Corporate Standard a company must have a base year recalculation policy and state any significance threshold it uses, and structural changes such as acquisitions or divestments are among the cases that trigger a recalculation. A restatement is not a failure; hiding one is. Quietly overwriting last year's number breaks the link to what readers saw before, so show the old figure, the new figure, the reason and the effect on the trend.
- GHG Protocol Corporate Standard (full PDF) GHG Protocol · Standard Chapter 5 covers base year recalculation; chapter 9 lists what a public report must include
Plain-language summariesabout 2 hours
Write the one-page summary that a manager, a customer or a journalist can understand without knowing the frameworks.
Framework wording copied into the summary makes sense only to people who have read the framework, so lead with the result and the reason, keep sentences short, define each acronym once, and say what the number means for the reader. For example (an invented sentence): 'Our emissions fell 8% because we switched two sites to renewable electricity; the fall is smaller if you compare against last year's boundary.' US government plain-language guidance is a good free model.
- Plain language guide series Digital.gov (US GSA) · Guide
Executive and investor decksabout 2 hours
Turn the report into a few slides for leaders and investors: what changed, why it matters and what you need them to decide.
A deck is not the report with smaller print, and showing every metric hides the three that matter. For executives use three to five slides: headline results against targets, the two biggest movements and their causes, risks to the next report, and the decision you need. For investors, follow the structure they know: governance, strategy, risk management, metrics and targets. The IFRS Knowledge Hub has short introduction videos for both ISSB standards that show the language investors use.
- IFRS Sustainability Knowledge Hub IFRS Foundation · Video Includes short introduction videos for IFRS S1 and S2
Practice task
Take one year of an emissions or HR dataset (your own inventory project or a public company's data) and write a four-page mini report: a one-page summary, one metric table with units and boundaries, a method note with limitations, and a content index that points each metric to its table.
Skills you build
Report structureMetric tablesContent indexesMethod notesRestatementsPlain-language writing
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- GRI Standards (free to download) GRI · Standard GRI 1 sets the reporting principles; the Universal Standards took effect on 1 Jan 2023
- IFRS Sustainability Standards Navigator IFRS Foundation · Standard Free of charge after you register; non-commercial use such as corporate disclosures needs no licence fee
- ESRS implementation guidance (IG 1, IG 2, IG 3) EFRAG · Guide IG 3 is an Excel list of datapoints that works as a drafting checklist; the guidance is non-authoritative
- OWID CO2 and greenhouse gas data with codebook Our World in Data · Dataset A good model of documenting every indicator with a description and a source; its README says these files are no longer updated and points to the current files on the OWID site
Live ESG analyst jobs
Roles whose title matches this career path.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.