Stage 2: Data toolkit · topic 5 of 47

Numbers literacy: ratios, intensity, finance basics

The maths and finance for reading targets, emission intensities, base-year changes and annual reports without being misled. You will calculate intensity and trace a number to an audited report.

  • Core
  • Beginner
  • about 12 hours

Part of the ESG analyst roadmap: from the basics to mid level

Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps

Before you compare any two numbers, write three things beside each: the formula, the denominator and the boundary, meaning what the company owned that year. Compare only when they match, and say so plainly when they do not. Then trace the inputs to an audited source. A denominator, a base year or a unit chosen to look good can make a comparison mislead.

The same year in absolute terms, intensity and a base-year reset

Year 1: 10,000 tonnes CO2e on revenue of 100 million. Year 2: 9,500 tonnes on revenue of 120 million. This company, its numbers and its plant are made up.

In absolute terms, (9,500 - 10,000) / 10,000 gives -5%. In intensity terms, year 1 is 10,000 / 100 = 100 tonnes per million of revenue and year 2 is 9,500 / 120 = 79.2, a fall of 20.8%. Both are correct. Intensity falls faster because revenue grew, and revenue can also grow through price rises alone, with no change in activity, so say which one a target uses.

Now change the story: the 9,500 tonnes covers only the old business, and in year 2 the company bought a plant that emitted 3,000 tonnes that year. Assume its records show the same 3,000 tonnes in year 1. Compare both ways:

  • Against the old base: year 2 reports 9,500 + 3,000 = 12,500 tonnes, and (12,500 - 10,000) / 10,000 = +25%.
  • Against a recalculated base: the base year becomes 10,000 + 3,000 = 13,000 tonnes, and (12,500 - 13,000) / 13,000 = -3.8%.

The second is the like-for-like comparison. How to write a recalculation policy is in the GHG Protocol Corporate Standard topic.

Checks before you quote a ratio

Confirm the period: a company’s financial year may not match the calendar year of your emissions data, and both must cover the same twelve months. Take revenue and headcount from the audited annual report, then compare them with the figure in your sheet. Name the currency, and say whether you used average or year-end rates. Currencies also differ across countries: SEBI’s circular of 28 March 2025 includes revenue intensities adjusted for purchasing power in BRSR Core, which India: BRSR, BRSR Core, ratings and the carbon market explains.

Build these checks into your auditable workbook, and chart the result in a dashboard only after they pass.

What you will learn

  • Calculate and compare intensity ratios per unit of revenue, employee or output, and say what each hides.
  • Tell a percent change from a change in percentage points.
  • Explain why a base year matters and how acquisitions or method changes distort a trend.
  • Spot outliers and use averages, rolling averages and year-on-year changes sensibly.
  • Find revenue, EBITDA, capex and opex in an annual report or 10-K and say how ESG numbers connect to them.

The parts of this topic

Intensity ratiosabout 2 hours

Emissions or resource use divided by a business measure such as revenue, employees, floor area or tonnes produced.

An intensity ratio divides an impact by a business measure: tonnes CO2e per million of revenue, per employee or per tonne of product. The EPA's simplified guide notes that intensity metrics can give more insight into changes over time than absolute emissions. A denominator chosen to flatter the result misleads the reader, as does comparing firms that use different ones. If emissions fall 5% while revenue grows 20%, for instance, intensity improves sharply even though the atmosphere sees only a small cut.

PPP-adjusted revenue intensityabout 1 hour

Why some rules adjust revenue for purchasing power so intensities can be compared across countries.

Revenue in rupees, euros and dollars buys different amounts of goods, so comparing emissions per unit of revenue across countries can mislead. Purchasing power parity (PPP) converts revenue to a common basis. SEBI's March 2025 circular on BRSR Core says that, for better global comparability, intensity ratios based on revenue adjusted for PPP have been included. You will see the idea in Indian reporting first. Do not convert revenue at market exchange rates and then compare the result with a PPP-based figure.

Percent vs percentage pointsabout 1 hour

A rise from 10% to 15% is five percentage points but a 50% increase; reports and targets mix the two constantly.

A percentage point is the simple difference between two percentages; a percent change is relative to the starting value. Eurostat's glossary says the term is used when comparing two different percentages, with the example of a rate rising from 10% to 12%, an increase of 2 percentage points. If renewable electricity rises from 20% to 30% of the total, that is ten percentage points, or a 50% increase. A target to 'increase women in management by 10%' is ambiguous until it says which is meant, and copying a figure into a report with the wrong unit changes its meaning.

Base years and why trends moveabout 2 hours

A trend against a base year changes when the company buys, sells or restructures, or changes its method.

A base year is the reference year against which progress is measured. If a company buys another firm, a naive comparison shows emissions jumping. The GHG Protocol's Appendix E on base year adjustments explains how to recalculate for structural changes so comparisons stay meaningful. Example: a firm acquires a factory with 10,000 tonnes of emissions; without a base-year recalculation, it looks as if the firm's performance worsened. The reverse also happens: a reduction that comes only from selling a high-emitting plant is not a real reduction.

Outliers, averages and rolling averagesabout 2 hours

How to spot a number that is probably wrong, and how to smooth noisy data without hiding real changes.

An outlier is a value far from the others. NIST's engineering statistics handbook has a short section on what outliers are and how to think about them. In ESG data, outliers are often errors: a meter read in the wrong unit, a duplicate invoice or a missing month. Gas use ten times higher in one month is more likely a unit error than a real event. A rolling average smooths monthly noise, for instance weather effects on heating, but it also hides step changes. If you delete an outlier, record why.

Revenue, EBITDA, capex and opexabout 2 hours

The few finance terms that appear in ESG work, from intensity denominators to the cost of a decarbonisation plan.

Revenue is the money earned from sales and is the usual denominator for intensity. EBITDA (earnings before interest, taxes, depreciation and amortisation) is a profit measure that companies define and quote themselves; IFRS 18, effective for periods beginning on or after 1 January 2027, requires disclosure of such management-defined performance measures. Capex is spending on long-lived assets such as equipment, which IAS 16 covers as property, plant and equipment; opex is day-to-day running cost. Example: a heat-pump retrofit is capex, its maintenance is opex. Use these terms exactly with the finance team, who do.

Reading an annual report or 10-Kabout 1 hour

Find the numbers you need and the business context: segments, risks, headcount and where the sustainability section sits.

Public companies publish an annual report; US filers file a Form 10-K. The business description explains what the company does and where; the risk factors list what management worries about; the financial statements give revenue, profit, capex and headcount. The Investor.gov guide explains how the 10-K and 10-Q are laid out. In practice you check that revenue in your intensity calculation matches the audited figure, which means taking numbers from the audited report, not a press release, or the denominators will not match.

Currency and inflation adjustmentabout 1 hour

Compare money values across years and countries fairly, using published exchange rates and price indices.

A company reporting in euros whose revenue base includes sales in pounds may need to convert at a stated rate; the ECB publishes euro reference rates daily. If you compare spending over several years, inflation changes what a euro buys, and statistical offices such as the UK's ONS publish price indices. Capex of 10 million in 2019 is not directly comparable to 10 million in 2025 without an adjustment. Say whether you used average-year or year-end exchange rates, and use one of them throughout a comparison.

Practice task

Take one listed company's last two annual reports and build a one-page table: revenue, headcount and reported Scope 1 and 2 emissions for both years, then absolute change, intensity per million of revenue and per employee, and a two-sentence explanation of why intensity and absolute emissions told different stories.

Skills you build

Intensity ratiosPercent vs percentage pointsBase-year effectsOutliers and averagesReading an annual reportCurrency and inflation adjustment

Resources for this topic

Every source here is free. Each link opens the provider's own site in a new tab.

Back to the whole roadmap

Live jobs

Live ESG analyst jobs

Roles whose title matches this career path.

All ESG & Sustainability Reporting jobs

Spot a problem with this topic?

Tell us what is wrong, missing or unclear here. Your note is attached to this topic.

Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.