Energy, water, waste, pollution and nature
Energy, water, waste, pollution and biodiversity are the environmental topics beyond carbon. You will measure each one, show the evidence behind it and map it to ESRS, GRI and BRSR Core.
- Core
- Intermediate
- about 18 hours
Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps
Place is the extra question these topics add to carbon data: where? Begin with a site list and a mapping table, then collect each metric with a written definition, a unit and an evidence source. Water and nature depend on place, waste depends on destination, and energy depends on how you define renewable. Settle those three definitions before the first site return arrives.
Water and waste figures an assessor will test
An invented printing works has metered water and a waste contractor, and every number is made up.
For water, the BRSR Core format allows a fallback when consumption cannot be measured directly: input water minus output water, from calibrated meter logs. Input meters read 120,000 KL and output meters 90,000 KL, so consumption is 120,000 minus 90,000 = 30,000 KL. Then find the works on WRI Aqueduct and print its stress rating next to that figure.
For waste, the works generated 400 tonnes. A contractor collected 300 tonnes, but vendor certificates show only 180 tonnes recycled or recovered. BRSR Core divides waste recycled or recovered by total waste generated: 180 / 400 = 45%. Dividing the 300 tonnes collected would give 75%, a figure no document supports.
Energy: define renewable once
BRSR Core adds up fuel, purchased electricity, heating, cooling and steam and self-generated energy, and counts self-generated electricity only once. An invented cold store burns 10,000 GJ of diesel, generates and uses 4,000 GJ of its own solar power and buys 6,000 GJ of grid electricity.
Total = 10,000 + 4,000 + 6,000 = 20,000 GJ. Renewable share = 4,000 / 20,000 = 20%. If you also count the grid electricity as renewable because certificates were bought for it, the share becomes 10,000 / 20,000 = 50%. The two figures answer different questions. Write down which rule you used, check that the framework you report to accepts it, and keep it the same each year.
Build the mapping before you collect
Fuel and electricity records are the same ones behind Scope 1 and 2, so collect them once and convert them for each purpose. List every metric against ESRS E2 to E5 (CSRD and the ESRS), GRI, BRSR Core and Taxonomy objectives three to six, with the owner and the evidence. The cycle that keeps this table alive is in data collection and controls.
Be modest about nature. Biodiversity measures are place-based and the frameworks are still moving, so a table that says what is measured, what is estimated and what is not yet covered is more useful than one headline number.
What you will learn
- Measure energy use by source and report a renewable share with clear definitions and units
- Account for water withdrawal, consumption and discharge and flag sites in water-stressed areas
- Calculate waste by type and disposal route and a diversion rate you can defend
- Report air pollutants and toxic releases using a recognised public inventory as a model
- Understand how nature and biodiversity targets and assessments are structured
- Map each metric to ESRS E2 to E5, GRI topic standards, BRSR Core and Taxonomy objectives three to six
The parts of this topic
Water withdrawal, consumption and stressabout 3 hours
Water numbers matter more when you know where the site is, so pair volumes with a local stress indicator.
GRI 303: Water and Effluents was published on 28 June 2018 and BRSR Core defines water consumed as water no longer available for use by the ecosystem. Record withdrawal, discharge and consumption by source, and then locate each site on a water-risk map, printing the stress rating beside each site's volume: group totals alone can hide that most use sits in a stressed basin. WRI's Aqueduct tools map water stress, drought and flood risk and publish data and methods under a Creative Commons Attribution licence.
- WRI Aqueduct World Resources Institute · Tool Water Risk Atlas and country rankings; data under CC BY 4.0
Waste by type and disposal routeabout 3 hours
Count waste by category and route, and report diversion only when the destination is evidenced.
The EU Waste Framework Directive entered into force on 12 December 2008 and sets out the waste hierarchy, the polluter-pays principle and extended producer responsibility; prevention is preferred and landfill is last. GRI 306: Waste was published in 2020. BRSR Core asks for each category of waste and the part recovered by recycling, re-use or other recovery, and notes that vendor certificates may support the figure. Waste a contractor collected counts as diverted only when a certificate shows where it went.
- European Commission: Waste Framework Directive European Commission · Law or regulation Waste hierarchy and producer responsibility
Air pollutants and toxic releasesabout 2 hours
Pollution reporting starts with a site-level list of substances, releases and permits, not with a group average.
The US EPA's Toxics Release Inventory was created under Section 313 of the Emergency Planning and Community Right-to-Know Act, and industrial and federal facilities report releases of listed toxic chemicals; tools on the page let you download and explore the data. It is a useful model for what a facility-level pollutant register looks like. Start from each site's permit conditions, then compare them with measured data, because permit limits alone do not show what was released. GRI 305: Emissions (2016) is the GRI standard to read for which air emissions it asks for.
Biodiversity and nature targetsabout 3 hours
Nature topics use place-based assessment, so start with where the company operates and sources, then choose measures and targets.
GRI 101: Biodiversity was published on 24 January 2024, and ESRS E4 covers biodiversity and ecosystems. The Science Based Targets Network provides target-setting guidance across freshwater, land, ocean and biodiversity. TNFD's site lists its LEAP approach for assessing nature-related issues, together with core global metrics and sector guidance. Example: a tree-planting project is an action, not a measure of the company's impact on nature, so report it as an action. Check each framework's current status before you rely on it.
- Science Based Targets Network SBTN · Guide Science-based targets for nature across freshwater, land, ocean and biodiversity
- Taskforce on Nature-related Financial Disclosures TNFD · Standard Recommendations, the LEAP approach, core global metrics and sector guidance
Circular economy metricsabout 2 hours
Circular economy means keeping materials in use, so metrics follow materials in, products out and what happens at end of life.
The Ellen MacArthur Foundation describes a circular economy through three principles: stop waste and pollution at design stage, keep products and materials in use at their highest value, and regenerate natural systems. ESRS E5 covers resource use and the circular economy, and the Taxonomy has a circular economy objective. Typical measures are recycled input share, product take-back and recovery rates. Before you report a recycled input share, check where the recycled material came from and what quality it is.
- Ellen MacArthur Foundation: Circular economy introduction Ellen MacArthur Foundation · Guide Three principles and definitions
Mapping to the Taxonomy objectives 3 to 6 and ESRS E2 to E5about 2 hours
One metric often serves several rules, so build a mapping table before you collect anything.
The EU Taxonomy lists six objectives, of which objectives three to six are water and marine resources, the transition to a circular economy, pollution prevention and control, and biodiversity and ecosystems. ESRS E2 to E5 cover pollution, water, biodiversity and resource use. A mapping table lists each metric, its definition, the frameworks that ask for it and the system it comes from. Keep it live. Example: compare the water-consumption definitions in ESRS, GRI 303 and BRSR Core. If they match, collect the figure once; if not, record the difference.
- Commission: EU taxonomy for sustainable activities European Commission · Guide States the six objectives and lists the delegated acts
Practice task
Build a non-carbon environmental data sheet for an invented industrial site: energy by source in kWh and GJ with a renewable share, water withdrawal and consumption by source with a water-stress flag, waste by type and route with a diversion rate, and a mapping table to ESRS E2 to E5, GRI 303 and 306 and BRSR Core.
Skills you build
Energy and renewable shareWater accountingWaste diversionPollution reportingNature and biodiversity basics
Resources for this topic
Every source here is free. Each link opens the provider's own site in a new tab.
- GRI Standards (English list with publication dates) Global Reporting Initiative · Standard Includes GRI 101 Biodiversity 2024, GRI 103 Energy 2025, GRI 303 Water and Effluents 2018 and GRI 306 Waste 2020
- Delegated Regulation (EU) 2023/2772 (the ESRS) EUR-Lex · Law or regulation ESRS E2 to E5 cover pollution, water, biodiversity and resource use; the 2026 simplification amends this text
- SEBI: Format of BRSR Core (Annexure I) SEBI · Template Worked definitions for water, energy and waste KPIs
Latest ESG & Sustainability Reporting jobs
No title matches the role right now, so these are the latest jobs in the same category.
No live jobs to show right now. Check back soon, or browse every green job.
Spot a problem with this topic?
Tell us what is wrong, missing or unclear here. Your note is attached to this topic.
Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.