Stage 8: Management systems and auditing · topic 31 of 50

ISO 45001 and ISO 14001 in practice

ISO 45001 (safety) and ISO 14001 (environment) are management systems run as one loop: plan, control, check, audit, fix. You will be able to map what a site already does onto them and spot the gaps.

  • Core
  • Intermediate
  • about 20 hours

Part of the EHS officer roadmap: how to become one and what to learn

Written by the GreenHired editorial teamSources last checked 20 November 2026How we research roadmaps

Both standards can be read as one loop you can walk any single item through: it is planned, controlled, measured, audited and fixed, and a certification auditor checks that each link exists and works. Learn the loop on one real item first, then read what each standard adds. The standards’ text is paid, so learn the logic from the free regulator and certifier pages here, then read the licensed text before any certification project.

A solvent store followed through the loop

A small machining plant has a solvent store. The scenario is invented to show the loop, not taken from a real site.

  1. Context and scope. The store is inside the plant’s scope. The waste contractor and the neighbouring business are interested parties.
  2. Hazards and aspects. One register entry covers fire and vapour (harm to people) and spills to drain and solvent waste (harm to the environment). The maintenance supervisor owns it.
  3. Control. A work instruction for decanting, a bunded shelf, and a transfer log signed by a trained operator.
  4. Emergency. A spill drill, with the time to contain the spill written down.
  5. Check. Waste volumes are reviewed each month, and a quarterly legal-register review catches a change in waste rules.
  6. Audit and fix. The internal auditor walks the store and finds an unlabelled drum. The finding is written as requirement, evidence and gap. Asking why shows that a new contractor was never given the labelling instruction, so the corrective action is a contract clause and an induction item, checked at the next audit.

Your crosswalk in the practice task does this for ten real activities, using the Plan-Do-Check-Act cycle as the frame.

What HSE says about adopting ISO 45001

HSE’s page, a regulator’s view, says the standard may help show compliance with health and safety law but in some respects goes beyond what the law requires, so consider carefully whether to adopt it. You can apply it without certification, but you can claim conformity only if it is implemented fully. Inspectors rely on a wide range of evidence, not a certificate alone, and a small organisation with less formal processes may find proportionate implementation hard.

EPA’s free pages describe ISO 14001 as five stages: commitment and policy, planning, implementation, evaluation and review. Step 2 above needs a sound register: see environmental aspects and impacts.

Your tasks around a certification visit

Adverts do name the standards. In our sample of 18 job postings (UK, Ireland, EU, US, India, Middle East and Asia; how we research roadmaps), 11 named ISO 45001 or ISO 14001, about 6 of those as a requirement or core duty, and 5 asked for an internal or lead auditor qualification, always as desirable, so learn the loop first and treat an auditor course as a separate decision.

An officer’s tasks can include keeping records ready, running internal audits (internal audit practice), supporting the certifier’s visits and tracking corrective actions. If an advert asks for an auditor qualification, see auditor training routes.

What you will learn

  • The purpose and shape of ISO 45001 (occupational health and safety) and ISO 14001 (environment), and what HSE says about adopting them.
  • How the Plan-Do-Check-Act stages map to context, risk, control, evaluation, audit and improvement.
  • How hazards and environmental aspects feed operational controls and emergency preparedness.
  • How internal audit, nonconformity and corrective action keep the system honest.
  • How certification works: Stage 1, Stage 2, surveillance and recertification, accreditation and edition changes.

The parts of this topic

Hazard identification and environmental aspectsabout 2 hours

Safety hazards and environmental aspects are the inputs to risk, control and objectives.

OSHA's hazard identification element lists collecting existing information, inspecting for hazards, investigating incidents and close calls, considering emergency and non-routine situations, then characterising and prioritising hazards for control. ISO 14001's matching step is the aspects and impacts register. One combined register, with columns for harm to people and harm to the environment, helps stop a solvent store being split into a safety item and an environmental item with no common owner.

Operational controlabout 2 hours

Put the controls for significant hazards and aspects into procedures, permits, training and supervision.

In EPA's Do phase the organisation implements operational controls to minimise its aspects, provides awareness and job-specific training, carries out plans to meet its objectives and puts the remaining system procedures in place. Safety adds controls such as permits, isolation and contractor management. A written work instruction for a chemical transfer, signed off by a trained operator, is one example. Try each procedure out with the people who do the job rather than writing it for the audit.

Emergency preparedness and responseabout 2 hours

Plan for foreseeable emergencies, test the plan with drills and learn from them.

HSE's emergency guidance for hazardous substances says to plan and practise for foreseeable accidents with equipment, procedures, trained people and waste arrangements, and to make plans known to the emergency services. EPA says emergency action plans are tested in the Check phase by drills, recording what went well and what needs improving. Example: a spill drill that times containment and asks how the spill could have been prevented. A plan that has never been exercised is only a document.

Monitoring, measurement and compliance evaluationabout 2 hours

Measure aspects, controls, objectives and compliance, then review the results.

EPA's Check phase covers monitoring and measuring aspects, operational controls, objectives and compliance obligations, with indicators such as the amount of water used per month. It also asks the team to evaluate compliance with legal requirements and voluntary commitments, at a frequency based on importance, recent change and track record. A quarterly legal-register review linked to the audit schedule is one way to do that. Name who reads each measure and what decision it informs, so the data does not just pile up.

Gap analysis and internal auditabout 2 hours

Before certification, compare the system with the standard and audit your own work.

A certification body advises an internal audit as one of the steps before the certification audit, and offers free gap analysis checklists for ISO 45001 and ISO 14001, downloaded after a contact form, to judge readiness. EPA says an internal audit uses an objective and impartial party who interviews staff and walks the facility. A first audit might take the permit-to-work process, using the checklist and the records, and walk the area as well, because documents alone do not show what happens on the floor.

Nonconformity and corrective actionabout 2 hours

When a requirement is not met, fix it, find the cause and stop it happening again.

EPA says that when a nonconformance occurs the team must correct it and mitigate the impact, identify the cause so it can prevent recurrence, then document a corrective action plan and fix the issue. Its examples include recyclables found in landfill-bound trash because staff were unsure what was recyclable, answered by training and signage. Example: a missing accumulation date on a hazardous waste container traced to an untrained contractor. Fix the container and the contract wording together, so the gap does not come back.

Certification audits: stages and the three-year cycleabout 2 hours

Understand how a certification body audits, what the stages are and how often it returns.

A UKAS-accredited certification body explains certification as a rolling three-year cycle of audits. Stage 1 reviews documents and readiness and, for most small or medium businesses, takes about a day. Stage 2 follows about six to eight weeks later, usually after the system has run for at least three months. Annual surveillance audits and recertification come after that, and major nonconformities must be fixed before certification is recommended. HSE says certification bodies should be accredited by UKAS or an equivalent body. The audit is a check on the system, not its goal.

Editions, amendments and transitionabout 2 hours

Standards are revised; learn which edition your employer or certifier uses and any transition deadlines.

BSI, the UK standards body, said in a press release dated 15 April 2026 that a revised ISO 14001 had been published, and training providers describe a transition course from the 2015 edition covering new clauses and wider topics such as climate change and biodiversity. DEKRA's page mentions a three-year transition but says IAF documents will set the exact period. The providers cited here still name ISO 45001:2018. ISO's own pages could not be opened, so confirm deadlines with your certifier. An old article that ranks first may describe a superseded edition, so ask which edition applies and by when.

Integrated management systemsabout 2 hours

Run safety and environment, and often quality, under one structure, with shared audit, review and document control.

ISO 45001 follows the Annex SL framework, a certification body says, and so fits with ISO 9001, ISO 14001 and ISO 27001. OpenLearn's free course on integrated management covers the components of an integrated system for safety, health, environmental, quality and business risks. Example: one internal audit programme, one management review and one corrective-action log serving all standards. Keep the safety-specific and environment-specific legal content visible when you merge, so no gap appears at certification that nobody was watching.

Practice task

Build a one-page crosswalk for a site you know. In one column list ten things the organisation already does (risk assessments, inspections, permits, training, spill drills). In the next, write which stage of the cycle each belongs to, then mark the three gaps a certification auditor would probably find.

Skills you build

ISO 45001 and ISO 14001 structureAspects and hazardsOperational controlCorrective actionCertification audit preparation

Resources for this topic

Every source here is free. Each link opens the provider's own site in a new tab.

Back to the whole roadmap

Live jobs

Latest Environmental Health & Safety jobs

No title matches the role right now, so these are the latest jobs in the same category.

All Environmental Health & Safety jobs

No live jobs to show right now. Check back soon, or browse every green job.

Spot a problem with this topic?

Tell us what is wrong, missing or unclear here. Your note is attached to this topic.

Notes are sent from this page with JavaScript on. Without it, write to us on the contact page.